Kenmore Dryer No Heat

[vacmechanic]

I have a Kenmore dryer model 110.86873100. It is no longer heating. Motor turns the drum fine. I have only checked the breaker, and dryer vent so far and no problems. If someone can give me a breakdown on a diagnosis procedure
(tree chart), I would greatly appreciate it. Thanks VM.

[JWWebster]

On the rear side is where you start. Unplug the dryer and remove the rear panel. On the right hand side is the heater. It has 2 safetys on it(top and bottom left side) if either of these are open then you will have no heat. Of course the heater itself the 2 bottom fat wires should have continuity. Note: Remove at least 1 wire from each item you check for continuity so you won't get a false reading or a back feed.

[vacmechanic]

Hi JW
        I checked all the components in the circuit, and found my heating element to be open. It is reading infinity on my meter. So I think my element is bad. I will get a new one on Monday, and let you know the result. VM

[vacmechanic]

Hello J.W.
             I replaced my heating element, and the dryer works like new! Thanks for your help. If you ever need any advice on a busted vacuum, let me know. Vac mechanic