I have this same issue, but my model number is actually Bosch dishwasher SHV46C03UC /14, and my water fill assembly and pressure fill switch appears exactly as in the first post. I noted reference to a video in this thread, but it does not appear for me. My machine fills and drains on start up exactly as described by TechnicianBrian, and never enters the wash cycle. I can close the pressure fill switch by gently moving the blue lever manually and the machine will enter the wash cycle. I can get it to finish the entire wash cycle, but of course I have to manually trip the fill switch each time water enters the water fill valve. What I noticed is that the mechanism, I presume via a diaphragm, in the disc shaped portion of the pressure fill mechanism does not actuate when water fills the water chamber. I removed it, cleaned it, wasn't that dirty, sealed the bottom opening with my hand, and blow gently, the diaphragm does not actuate the blue trip lever. Is the diaphragm the problem, or am I not getting enough pressure in the water chamber to move the diaphragm? The fill hose is filled with debris, and I plan to clean it, but I want to order a new pressure fill switch if I can get a good recommendation that mine is truly defective and the etiology of my problem, and not merely a plugged or dirty sump, etc. Greatly appreciate your input. Thank you.