Author Topic: f-7 code  (Read 1693 times)

Offline JPG

  • VIP Member
  • Member Since: Nov 2007
  • Posts: 132
f-7 code
« on: September 29, 2008, 07:50:01 AM »
Hi I have a stove which an f-7 code pops up everything works but it still pops up . What does this mean???


as always tks for your help

jpg

Model jgb918sel1ss

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: f-7 code
« Reply #1 on: September 29, 2008, 09:07:33 AM »
GE / Hotpoint / RCA
Oven Fault Codes
Display Condition Remedy
F0 & F1 Failed Thermistor Control Replace ERC
F2 Oven Temp Exceeds 590 with unlocked door High resistance in Sensor, likely a bad sensor
F3 Open Sensor circuit Open (blown) sensor fuse or bad Sensor
F4 Shorted wire or Sensor locate short and correct it
F7-A Function pad button stuck Clean and unstick
F7-B Bad Clock Replace Clock
F8 Electrical component failure Replace ERC
F9 Program with door circuit Check wiring
 These are old codes but they give you an idea what to look for. If you order a new part beware of this fact with GE: they will sometimes send an aftermarket getby with no instructions. The idea being MR GE the GE fixer will know how to hook up the new part and therefore you must call him. My opinion.
« Last Edit: September 29, 2008, 09:11:25 AM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

 

Frigidare LEVM30FE Microwave E21 code

Started by Earl Dryer

Replies: 6
Views: 3134
Last post September 27, 2011, 04:48:24 PM
by rego
Whirlpool Microwave F2Q1 Error Code

Started by TechnicianBrian

Replies: 0
Views: 2224
Last post April 15, 2008, 09:57:53 PM
by TechnicianBrian
Whirlpool Polara Range Error Code

Started by TechnicianBrian

Replies: 5
Views: 8632
Last post December 29, 2008, 09:03:25 PM
by TechnicianBrian
F5 code on GE oven

Started by Glenn

Replies: 2
Views: 6202
Last post September 30, 2008, 09:14:06 AM
by JWWebster
Dacor Range F1 Error Code

Started by TechnicianBrian

Replies: 0
Views: 17782
Last post November 09, 2008, 07:34:10 AM
by TechnicianBrian
KEDC205YBL Kitchen Aid stove F3 code

Started by GRIFF

Replies: 7
Views: 2677
Last post November 16, 2008, 04:55:49 PM
by GRIFF