misplaced tech sheet

[joc]

I have misplaced the tech sheet for my dryer and need to know which two buttons to push to get into test mode.

Model GLEQ952CW

[Repair-man]

To start the test programs, remove power from the dryer.
Reconnect power to the dryer and within 10 seconds
press and hold the temp and the stop pads for at least 2
seconds, then release. The control is now in the test
function.

1. After activation, the WRINGLE RID icon should be
on.

You didn't say what you intended to do after you got into the test mode, but you'll likely ask later. Would it not be easier to explain the problem you are having first?