Author Topic: Whirlpool Control Board or Touch Pad Controls  (Read 1883 times)

Offline jefcris

  • VIP Member
  • Member Since: Sep 2008
  • Posts: 1
Whirlpool Control Board or Touch Pad Controls
« on: September 27, 2008, 04:27:44 PM »
Dishwasher won't start. It will accept commands in Cycles and Options but the Start/Resume button will not start the cycle. Then it clears the cycle and goes dark after 30 seconds. The drain command does work and the diagnostic cycle will run. I have tested the door switches and the thermal switch and they are OK. The door switches are engaged with the door closed.

Is this most likely the touch pad not sending the signal to the board or is the board bad?

Model Number: GU2400XTPB3 icon

Offline jayman73

  • VIP Member
  • Member Since: Sep 2008
  • Posts: 43
Re: Whirlpool Control Board or Touch Pad Controls
« Reply #1 on: September 27, 2008, 09:25:24 PM »
Dishwasher won't start. It will accept commands in Cycles and Options but the Start/Resume button will not start the cycle. Then it clears the cycle and goes dark after 30 seconds. The drain command does work and the diagnostic cycle will run. I have tested the door switches and the thermal switch and they are OK. The door switches are engaged with the door closed.

Is this most likely the touch pad not sending the signal to the board or is the board bad?
diagnostic should have a test for the touch pad and souds like its working would say board

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: Whirlpool Control Board or Touch Pad Controls
« Reply #2 on: September 27, 2008, 09:56:46 PM »
I believe jayman73 is correct. Replace the board.

Part number: 8564546

 

8546558 Whirlpool Dishwasher Control Board

Started by AJ

Replies: 0
Views: 2699
Last post June 08, 2009, 12:26:54 PM
by AJ
8564542 Whirlpool Dishwasher Control Board

Started by AJ

Replies: 0
Views: 4631
Last post September 23, 2009, 06:39:13 PM
by AJ
8564546 Whirlpool Dishwasher Control Board

Started by AJ

Replies: 0
Views: 4255
Last post September 23, 2009, 06:57:39 PM
by AJ
Whirlpool Dishwasher Flamed out K2 relay on Whirlpool control board

Started by quantum1976

Replies: 10
Views: 4077
Last post December 22, 2009, 09:23:41 AM
by jumptrout51
Whirlpool ADP5447IX Control Board

Started by Dhul

Replies: 5
Views: 676
Last post February 05, 2013, 01:17:58 PM
by washman
3385734 Whirlpool Dishwasher Button Control Panel

Started by AJ

Replies: 0
Views: 3381
Last post April 30, 2009, 11:39:55 PM
by AJ