Author Topic: Washer WD-1274FHB Service manual  (Read 12353 times)

Offline a3gus

  • VIP Member
  • Member Since: Sep 2008
  • Posts: 7
Washer WD-1274FHB Service manual
« on: September 22, 2008, 03:31:48 PM »
Hello,

Do you have idea where I could find the service manual for WD-1274FHB?

Thanks.

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Washer WD-1274FHB Service manual
« Reply #1 on: September 23, 2008, 04:55:25 AM »
Is the manual for the WD3274 going to be much different?  Have a look:

 http://appliancejunk.com/forums/index.php?action=downloads;sa=view;id=10
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline a3gus

  • VIP Member
  • Member Since: Sep 2008
  • Posts: 7
Re: Washer WD-1274FHB Service manual
« Reply #2 on: September 23, 2008, 02:11:43 PM »
Unfortunately for WD3274 the motor is different. This model cannot show the foult code SE (sensor error) as mine. I'm trying to find this sensor (Hall sensor) but apparentely is impossible, it's comming with the motor assy.

Any idea for a good supplyer for LG parts?

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Washer WD-1274FHB Service manual
« Reply #3 on: September 23, 2008, 04:35:35 PM »
SENSOR ERROR

• The electric contact between the connectors
(5 pin, male in the Wire Harness and 5 pin female in the Hall Sensor) is
bad or unstable.
ƒ_ Reconnect or repair the contact in the connector
• The connector (6 pin, male, natural) in the Wire Harness is not
connected to the connector (6 pin, female, natural) of PWB
ASSY(Main) or the electric contact of connectors is bad/unstable.
ƒ_ Reconnect or repair the contact in the connector
• The electric contact between the connectors ‘a6 pin, male in the Wire
Harness and 6 pin female in the controller(Main)‘bis bad or unstable.
ƒ_ Reconnect or repair the contact in the connector
• The Wire Harness between Hall Sensor in the MOTOR and PWB
ASSY(Main) is cut(open circuited).
ƒ_ Repair/replace the damaged WIRE HARNESS
• The Hall Sensor is out of order/defective.
ƒ_ Replace the Motor
• The controller(Main) is out of order/defective.
ƒ_ Replace the PWB ASSY(Main)

the Hall Sensor is available ...
Sears U.S. has some LG parts... check Sears CA

Do you know the part number for your Sensor or your Motor ?

I'll be back in a few hours...
« Last Edit: September 23, 2008, 04:38:57 PM by RegUS_PatOff »
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Washer WD-1274FHB Service manual
« Reply #4 on: September 23, 2008, 05:07:55 PM »
Seems to me you need to just go around the harness and make sure you have a good connection with no green corosion anywhere.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Washer WD-1274FHB Service manual
« Reply #5 on: September 23, 2008, 09:35:42 PM »
here's the Info & Manuals for the WD1070 (& WD1270)

WD1070 Info
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline Timatae

  • VIP Member
  • Member Since: Sep 2008
  • Posts: 3
Re: Washer WD-1274FHB Service manual
« Reply #6 on: September 25, 2008, 07:09:03 PM »
Hall sensor is located behind the stator. Have to remove panel from back of unit, use a 17 mm wrench to remove the stator, Then using a 10 mm to loosen up bolts to remove the motor which the hall sensor is connected to it. It only has a clip that holds it in place. Common part that goes bad from people using too much soap :-\   Hope this helps!  Lg recommends using only 2 tablespoons of detergent as well as softener..

Offline a3gus

  • VIP Member
  • Member Since: Sep 2008
  • Posts: 7
Re: Washer WD-1274FHB Service manual
« Reply #7 on: September 26, 2008, 02:51:53 PM »
I have checked with two spare parts suppliers, the Hall Sensor is not available alone. It's comming with the motor assy.
The motor part no. is WMD-300C2 (110V)
The Hall Sensor part no. is SB 040302 (i'm not sure, that's the number writen on the part) see picture attached.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Washer WD-1274FHB Service manual
« Reply #8 on: September 26, 2008, 03:39:27 PM »
Reggie posted this with his list of failure codes " The Hall Sensor is out of order/defective. ƒ_ Replace the Motor" So that there tells you the motor needs to be replaced with that sensor as one item unless Gus knows something we don't know. Do they have an after market part Gus?(aka a3gus)
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline a3gus

  • VIP Member
  • Member Since: Sep 2008
  • Posts: 7
Re: Washer WD-1274FHB Service manual
« Reply #9 on: September 28, 2008, 11:45:47 AM »
I don't know if they have an after market part. But I find it very strange that LG forces me to buy an expensive motor assy for a cheap piece of plastic which is broken (the hall sensor).
Why the f..k they made this piece detachable if there is no way to buy it by itself??

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Washer WD-1274FHB Service manual
« Reply #10 on: September 28, 2008, 02:49:43 PM »
Is their any way to glue that sucker back in place I wonder?
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline a3gus

  • VIP Member
  • Member Since: Sep 2008
  • Posts: 7
Re: Washer WD-1274FHB Service manual
« Reply #11 on: October 15, 2008, 11:39:42 AM »
I have repaired my washer machine... it was the Hall Sensor... I had to buy the entire motor assy for that.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Washer WD-1274FHB Service manual
« Reply #12 on: October 15, 2008, 11:44:44 AM »
Glad you got it fixed. If I wanted to buy one of those machines would you recommend it?
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline a3gus

  • VIP Member
  • Member Since: Sep 2008
  • Posts: 7
Re: Washer WD-1274FHB Service manual
« Reply #13 on: October 28, 2008, 02:20:43 PM »
well... my answer is no because of LG... difficulty to find parts.

Offline tonywong

  • VIP Member
  • Member Since: Nov 2008
  • Posts: 1
Re: Washer WD-1274FHB Service manual
« Reply #14 on: November 14, 2008, 04:03:58 PM »
I have checked with two spare parts suppliers, the Hall Sensor is not available alone. It's comming with the motor assy.
The motor part no. is WMD-300C2 (110V)
The Hall Sensor part no. is SB 040302 (i'm not sure, that's the number writen on the part) see picture attached.

Funny thing is that I have exactly the same model as you do and with the same error code. How much and where did you pick up the replacement motor from?

The local repair shop that LG recommended came by for $70 only to open up the back and tell me they want to replace both the logic board and the motor for $500+.  >:(

 

frigidaire washer service manual

Started by mbatten

Replies: 9
Views: 18533
Last post November 12, 2007, 11:38:01 PM
by BrntToast
16010061 Maytag Neptune Washer Service Manual

Started by AJ

Replies: 0
Views: 5010
Last post March 17, 2008, 01:00:09 PM
by AJ
16010373 Maytag Dependable Care Washer Service Manual

Started by whirlpooltech

Replies: 5
Views: 9326
Last post March 02, 2011, 12:38:31 AM
by klhglobal
LG WM2075 Washer Service Repair Manual

Started by apptech

Replies: 0
Views: 4673
Last post March 23, 2008, 04:32:55 PM
by apptech
LG WM2042 Washer Service Repair Manual

Started by apptech

Replies: 0
Views: 3549
Last post March 23, 2008, 04:32:56 PM
by apptech
LG WM2032 Washer Service Repair Manual

Started by apptech

Replies: 0
Views: 7461
Last post March 23, 2008, 04:32:56 PM
by apptech