Author Topic: Kenmore Elite Oasis Washer  (Read 7599 times)

Offline MajorApp

  • Technician
  • Member Since: Feb 2008
  • Posts: 547
  • Country: us
Kenmore Elite Oasis Washer
« on: September 20, 2008, 03:17:47 PM »
 The machine was dead. I replaced the machine/motor control assembly. The machine powered up. When I started a cycle this is what it does. The pump comes on for 10 seconds. then it starts to fill for 10 seconds then stops. then it starts filling through the detergent cup for 10 seconds and stops, then it starts filling the tub again for 10 seconds then stops, then it starts a slow spin for about 10 seconds and then repeats the process over again. I did manual diagnostics on every function and everything works fine. I tried a new user interface assembly and the same thing happened. Also, the machine is 2 years old and the water hoses were connected backwards since installation. I would appreciate any information.

Model 110.27087601

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Kenmore Elite Oasis Washer
« Reply #1 on: September 21, 2008, 07:30:22 AM »
Will the pump drain the water? The water level switch apparently thinks not. 
To check the pressure switch at the CCU, perform the following steps:

1. Unplug washer or disconnect power.
2. Disconnect pressure switch connector
PRS2 (see page 4-5 in the manual below) from the CCU.
3. Set the ohmmeter to the R X 1 scale.
4. Touch the ohmmeter test leads to connector pins 1 and 2 on PRS2. The meter should indicate 0 Ω


What about error codes?



Oasis Manual
« Last Edit: September 21, 2008, 08:02:21 AM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline MajorApp

  • Technician
  • Member Since: Feb 2008
  • Posts: 547
  • Country: us
Re: Kenmore Elite Oasis Washer
« Reply #2 on: September 21, 2008, 11:08:18 AM »
 The pump does drain the water. I've filled it many times during diagnostics and drained it. I should mention that when I first installed the control assembly there was an error code F83 that is Door Unlock Failure. I did the test on the door unlock, (TEST #8, page 6) and the door lock, unlock works perfectly.

Offline Majestic

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 1
Re: Kenmore Elite Oasis Washer
« Reply #3 on: October 22, 2008, 08:02:59 PM »
SO HOW DO YOU CLEAR THE ERROR CODE?

Offline bkendall

  • Technician
  • Member Since: Nov 2008
  • Posts: 6
Re: Kenmore Elite Oasis Washer
« Reply #4 on: November 01, 2008, 11:50:42 AM »
Did you find the problem ?

Offline MajorApp

  • Technician
  • Member Since: Feb 2008
  • Posts: 547
  • Country: us
Re: Kenmore Elite Oasis Washer
« Reply #5 on: November 01, 2008, 07:06:36 PM »
 It turns out the customer had a 2 year warranty instead of the usual 1 year so I let sears take over. It's been 3 weeks and it's not fixed yet. Parts for these machines take 2 weeks to get. The customer is going to let me know when it's fixed and what was wrong. I'll let you know.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9325
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Kenmore Elite Oasis Washer
« Reply #6 on: February 22, 2009, 12:26:45 PM »
I know it's been some time ago now, but did you ever get a update from your customer?
Hope you find our site helpful.
Follow us on Google+

Offline MajorApp

  • Technician
  • Member Since: Feb 2008
  • Posts: 547
  • Country: us
Re: Kenmore Elite Oasis Washer
« Reply #7 on: February 22, 2009, 01:06:22 PM »
No, I did not

Offline apptech

  • Technician
  • Member Since: Sep 2007
  • Posts: 160
Re: Kenmore Elite Oasis Washer
« Reply #8 on: February 22, 2009, 02:03:55 PM »
knowing how sears operates they are still waiting for them

 

Kenmore Elite Oasis Washer

Started by cigar7

Replies: 12
Views: 18051
Last post September 03, 2009, 01:18:48 PM
by cigar7
Kenmore Elite Oasis HE Washer - oL code

Started by showlowjimbo

Replies: 4
Views: 9945
Last post April 07, 2009, 05:11:15 PM
by Repair-man
Kenmore Elite Oasis HE Washer - oL code

Started by NH

Replies: 0
Views: 4048
Last post April 26, 2010, 01:14:52 AM
by NH
Kenmore Elite Oasis Washer lid lock

Started by jembows

Replies: 1
Views: 4750
Last post June 14, 2010, 10:34:12 PM
by schaffersapplian
Kenmore Oasis Washer Leaking

Started by TechnicianBrian

Replies: 0
Views: 5246
Last post October 05, 2008, 07:23:38 AM
by TechnicianBrian
Kenmore elite washer

Started by breilly

Replies: 5
Views: 2413
Last post October 13, 2008, 08:20:28 PM
by JWWebster