Author Topic: Whirlpool Ultimate Care II  (Read 20667 times)

Offline jakki

  • VIP Member
  • Member Since: Mar 2008
  • Posts: 6
Whirlpool Ultimate Care II
« on: September 12, 2008, 10:51:31 AM »
It squeals when going into the spin cycle and stops, we've taken it apart but found nothing. It is still doing it, the washer is 5 years old, top loader. Please any clue?
What I need is a diagram of the washer and parts...a piece of plastic fell off and we have no idea where it belongs..LOL

Model Number: LSQ9564MQ0

Offline jakki

  • VIP Member
  • Member Since: Mar 2008
  • Posts: 6
Re: Whirlpool Ultimate Care II
« Reply #1 on: September 12, 2008, 10:57:07 AM »
I made a mistake on model number:  LSQ9564MQ0

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9242
  • Country: us
    • ApplianceJunk.com - Appliance Repair Help
Re: Whirlpool Ultimate Care II
« Reply #2 on: September 12, 2008, 11:58:08 AM »
No problem jakki,

I edited the topic to include the correct model number.

Did you check the water pump?
Follow us on Google+ to see updates from our Google Drive and more!

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9242
  • Country: us
    • ApplianceJunk.com - Appliance Repair Help
Re: Whirlpool Ultimate Care II
« Reply #3 on: September 12, 2008, 12:06:38 PM »
Quote
What I need is a diagram of the washer and parts

You maybe already did this, but enter your model number in the diagram box in the top left corner. Then click "Get Diagram".

Your exact model was not listed when I tried it, but the ones listed will be very close to the same.

Quote
a piece of plastic fell off and we have no idea where it belongs

Could you post a photo of the part?

The link below is a list of parts for your model. Do you see anything at that link that looks like the piece of plastic that fell off?

LSQ9564MQ0 Parts List with Photos.
Follow us on Google+ to see updates from our Google Drive and more!

Offline jakki

  • VIP Member
  • Member Since: Mar 2008
  • Posts: 6
Re: Whirlpool Ultimate Care II
« Reply #4 on: September 12, 2008, 01:14:31 PM »
That part was a shield that belongs above the water hoses and wires.
We checked the water pump, but the tub itself will not spin, it does then quits.
I replaced a coupler last year..so we are at a loss right now..I guess laundry will go to laundry mat.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Whirlpool Ultimate Care II
« Reply #5 on: September 12, 2008, 02:10:31 PM »
Probably the coupling again. They break pretty easy.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline jakki

  • VIP Member
  • Member Since: Mar 2008
  • Posts: 6
Re: Whirlpool Ultimate Care II
« Reply #6 on: September 16, 2008, 11:37:17 AM »
You all won't believe this but we ended up buying new washer and dryer. They both started acting up, so we replaced them.
We have the Kenmore Elites now...Nice set.

 

Whirlpool ultimate care washer engine buzz

Started by rasputins fingerbone

Replies: 5
Views: 3398
Last post January 28, 2008, 06:24:52 PM
by AJ
whirlpool ultimate care II leaking water from bottom front and wont spin

Started by vasdoc

Replies: 6
Views: 6500
Last post October 12, 2008, 09:20:49 PM
by JWWebster
Whirlpool Ultimate CAre II

Started by claudio309@veriz

Replies: 6
Views: 3650
Last post November 15, 2009, 07:51:18 PM
by kellonnie
Whirlpool Ultimate Care 2 Neutral drain in gearbox

Started by bwalsh577

Replies: 1
Views: 2005
Last post January 30, 2010, 11:58:46 AM
by whirlpooltech
Whirlpool Ultimate Care Washer Won't Spin Correctly

Started by Agrajag

Replies: 10
Views: 2338
Last post September 29, 2011, 01:57:18 PM
by AJ
Whirlpool Ultimate Care II Washer leaking water from bottom

Started by heathermoler

Replies: 5
Views: 3458
Last post August 29, 2012, 08:30:12 PM
by JWWebster