Author Topic: no spin  (Read 1362 times)

Offline JPG

  • VIP Member
  • Member Since: Nov 2007
  • Posts: 121
no spin
« on: August 19, 2008, 04:47:17 PM »
i noticed sometimes it will spin sometimes not, one time when it wasn't spinning a turned the pulley to help it than it started spinning again. Is it the motor??? This is not one of those inverter board motors its a reg. motor...Is it possibley that clutch does that come withe the motor??  tks  for your help  JPG

Model wbb4500e1ww

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: no spin
« Reply #1 on: August 19, 2008, 05:00:16 PM »
When I look at the parts description for this model, it refers to the WH20X10019 as a "Clutch-Less Motor".

Which pulley was not turning until you spun it?  If it was the one on the motor, it does not appear to be a repairable part.  I'd go for a new belt myself if you cannot adjust the motor mounts for better tension.

« Last Edit: August 19, 2008, 05:10:42 PM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

 

Repair Guide: Whirlpool Direct Drive Washer - No agitate or spin

Started by AJ

Replies: 13
Views: 23937
Last post January 02, 2009, 01:09:38 PM
by AJ
Maytag Neptune MAH4000AWW - No Spin.

Started by larry

Replies: 39
Views: 55061
Last post February 21, 2011, 01:22:14 PM
by bwhelan
whirlpool belt drive washer won't spin

Started by mthd60sprty

Replies: 7
Views: 5809
Last post June 06, 2013, 08:42:12 AM
by fairbank56
Whirlpool direct drive agitates but no spin

Started by philhyde

Replies: 19
Views: 5631
Last post October 04, 2007, 12:32:52 PM
by philhyde
Kenmore (frigidaire?) washer 417.29042991 No Spin - drains fine

Started by ratt2581

Replies: 1
Views: 5182
Last post September 21, 2007, 09:44:54 PM
by AJ
Front end tumble action washer 417.29042991 No Spin - drains fine

Started by ratt2581

Replies: 15
Views: 8112
Last post September 26, 2007, 05:37:06 PM
by AJ