Author Topic: Kenmore Dishwasher  (Read 2582 times)

Offline MajorApp

  • Technician
  • Member Since: Feb 2008
  • Posts: 555
  • Country: us
Kenmore Dishwasher
« on: August 18, 2008, 05:04:22 PM »
 Everything works until the drain part of the cycle. Can I rule out the motor. Would it be the control board timer? I don't get many dishwasher calls, so I am not familiar with their problems.

Model 665.15969990

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Kenmore Dishwasher
« Reply #1 on: August 18, 2008, 06:22:21 PM »
Does that model start with 665. ? Sorry to be such a stickler, but you are asking a technical question that requires a little research, thanks.

Your motor has 4 wires on the harness. To check the drain windings of the motor, disconnect power to the dishwasher. Unplug the harness connector at the motor and set your OHM meter to RX1.

1. Touch and hold one ohmmeter probe to
the terminal no. 2 (Gray or Black).
2. Touch the other ohmmeter probe to the
terminal no. 4 (White).
3. The ohmmeter should show a reading
between 3-8 ohms on the ohms scale.
« Last Edit: August 18, 2008, 06:32:39 PM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline MajorApp

  • Technician
  • Member Since: Feb 2008
  • Posts: 555
  • Country: us
Re: Kenmore Dishwasher
« Reply #2 on: August 18, 2008, 06:52:50 PM »
 Yes, it is a 665. It's not printed that way though.

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Kenmore Dishwasher
« Reply #3 on: August 18, 2008, 07:09:16 PM »
It IS in the door.  For future reference, never pay attention to the models pasted in a User Guide. Often, they are a general series and they never contain the allmighty prefix that helps us look stuff up. Dang Sears for being so confusing :)
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline MajorApp

  • Technician
  • Member Since: Feb 2008
  • Posts: 555
  • Country: us
Re: Kenmore Dishwasher
« Reply #4 on: August 18, 2008, 07:38:06 PM »
 This is the number from the door. It was printed model 665 on the top line and underneath was printed model #, so I thought 665 was the basic, general number.

Offline Al Capone

  • Administrator
  • VIP Member
  • Member Since: Feb 2008
  • Posts: 409
  • Country: us
    • ApplianceJunk.com
Re: Kenmore Dishwasher
« Reply #5 on: August 18, 2008, 08:22:46 PM »
Edited first post to correct model number.
RepairClinic.com - Order now for same day shipping. 365 day return policy!

AppliancePartsPros.com - Over 1 Million Appliance Parts In-Stock. 365-Day Hassle Free Return Policy!

 

Kenmore Dishwasher - Doesn't always drain.

Started by yeltu1188

Replies: 1
Views: 4647
Last post September 15, 2007, 10:36:53 AM
by Pegi
Kenmore Elite Dishwasher

Started by sparky823

Replies: 8
Views: 5742
Last post October 11, 2007, 09:16:14 AM
by Pegi
Kenmore Elite Dishwasher Does Not Start

Started by rgletter

Replies: 5
Views: 5789
Last post December 14, 2007, 07:45:52 PM
by rickgburton
Kenmore 665 dishwasher chopper assembly cover

Started by tomnewf

Replies: 2
Views: 8003
Last post January 06, 2008, 10:59:43 AM
by AJ
Kenmore dishwasher

Started by lcsw

Replies: 4
Views: 5500
Last post February 08, 2008, 05:04:28 PM
by AJ
Kenmore dishwasher motor problem

Started by lgmccoy1

Replies: 3
Views: 8459
Last post February 22, 2008, 11:06:24 AM
by RegUS_PatOff