Maytag Fountain Control Panel

[Big Dave]

I hate to ask this but.

How do I get the fountain trim loose to change the touch panel for the ice and water dispenser?

Dont see any screws-It looks like it may push up and snap out.

 

Model MZD2665HES

[Repair-man]

1. Remove drip tray by pulling it straight out from door.
2. Remove two hex screws at the bottom of facade that
were hidden by drip tray.
3. Push down on facade to release retainer clips.
4. Remove facade and disconnect ten pin connector from
control board.
5. Reverse procedure to reassemble.

[Big Dave]

Thank you much for your Info.