Whirlpool Dishwasher GU2400XTPS6 dead?

[baxleyk1]

Hi!  First post here... My Whirlpool dishwasher won't start. When I try the diagnostic cycle, it cycles through fine, then once the diagnostic is done, it still won't start. It shows the two dashes in the display indicating a door problem; I took it apart and couldn't find anything obviously wrong with the latch or other door components. I even cleaned the micro switch contacts with no results. Any ideas?

Model Number: GU2400XTPS6

[Pegi]

It shows the two dashes in the display indicating a door problem

check your door switches...

[Pegi]

TECH SHEET

[rickgburton]

Check both switches using an ohm meter. There is also a thermal electronic fuse behind the control panel you should check.
Door Switch # 8269209 (2)
Thermal fuse # 8269213