Author Topic: Kenmore refrigerator not cold  (Read 376 times)

Offline mahplane

  • VIP Member
  • Member Since: Sep 2014
  • Posts: 2
Kenmore refrigerator not cold
« on: September 02, 2014, 01:27:34 PM »
Model # 106.55616400 fridge side about 55 degrees freezer ok found evap coils bottom 6 inches completely iced over defrosted it and checked everything with the diagnostic panel and it said the freezer thermister was bad defrost mode seems to b working any other ideas to what it could be

Offline Maytag Man 6725

  • Technician
  • Member Since: Jul 2014
  • Posts: 316
  • Country: us
  • Technician since 1990
Re: Kenmore refrigerator not cold
« Reply #1 on: September 02, 2014, 08:33:19 PM »
Only the bottom 6 inches of coil had ice on them ?

Offline mahplane

  • VIP Member
  • Member Since: Sep 2014
  • Posts: 2
Re: Kenmore refrigerator not cold
« Reply #2 on: September 02, 2014, 10:02:09 PM »
Yes it was solid ice not frost

Offline Maytag Man 6725

  • Technician
  • Member Since: Jul 2014
  • Posts: 316
  • Country: us
  • Technician since 1990
Re: Kenmore refrigerator not cold
« Reply #3 on: September 03, 2014, 06:37:35 AM »
If it was solid ice, look for your drain to be blocked or for icemaker fill tube leaking

 

Kenmore Refrigerator to Cold

Started by TechnicianBrian

Replies: 0
Views: 2723
Last post June 14, 2008, 06:52:51 AM
by TechnicianBrian
KENMORE REFRIGERATOR NOT COOLING, FREEZER COLD

Started by whit

Replies: 3
Views: 6256
Last post December 17, 2008, 06:52:14 AM
by whit
Kenmore refrigerator not getting cold

Started by ek11347

Replies: 3
Views: 3409
Last post July 12, 2009, 02:26:43 PM
by JWWebster
Kenmore Elite/Whirlpool Refrigerator - Fridge too cold

Started by taliskan

Replies: 6
Views: 5387
Last post March 26, 2011, 07:28:32 PM
by niobrara
Kenmore Side By Side Refrigerator not getting cold - Start Relay? Model -

Started by Ronyeager

Replies: 3
Views: 4591
Last post November 01, 2011, 08:50:12 PM
by krazytech
How to Force Defrost Kenmore Cold Spot Refrigerator 106.53609201

Started by cphilp3

Replies: 0
Views: 599
Last post April 21, 2014, 10:47:10 PM
by cphilp3