Author Topic: Help with putting wires back on right  (Read 230 times)

Offline Cableman713

  • VIP Member
  • Member Since: Aug 2014
  • Posts: 2
Help with putting wires back on right
« on: August 23, 2014, 04:44:59 PM »
I replace the spark controller on a Maytag MGR7662WB. Forgot to write which wire go where after pulling  4 wires on the left hand side of the controller. The colors are the Blue,orange,red, and yellow. Could someone tell me the order they should be. :oops:

Offline dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 1438
  • Country: us
Re: Help with putting wires back on right
« Reply #1 on: August 23, 2014, 05:46:26 PM »
You should have a wire diagram there somewhere.Here is a video.Make sure its your part number and you watch the wire on the colors on the board.You can pause the video.
« Last Edit: August 23, 2014, 05:49:33 PM by dab147315 »

Offline Cableman713

  • VIP Member
  • Member Since: Aug 2014
  • Posts: 2
Re: Help with putting wires back on right
« Reply #2 on: August 23, 2014, 06:24:28 PM »
Thanks

 

GE converting back to natural gas from lp

Started by LB

Replies: 2
Views: 1762
Last post March 15, 2009, 07:07:38 AM
by Repair-man
Proper method to remove built-in double oven in order to access back?

Started by ratdog

Replies: 2
Views: 6247
Last post May 12, 2009, 08:23:08 AM
by ratdog
Frigidaire Gas Range - bake burner lights but does not come back on when hot

Started by JimRice

Replies: 1
Views: 1968
Last post August 21, 2011, 05:16:20 PM
by jumptrout51
how can i access wires behind oven body on GE wall mount oven? HELP!

Started by aibaxter

Replies: 7
Views: 1224
Last post February 15, 2012, 10:26:00 PM
by MajorApp
wiring diagram GE self cleaning oven bottom element has threee wires

Started by scott196547

Replies: 4
Views: 1259
Last post October 29, 2012, 12:55:45 PM
by JWWebster