Author Topic: F30 error  (Read 9065 times)

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: F30 error
« Reply #10 on: July 23, 2008, 07:09:50 AM »
Excuse me for my input, but I've been monitoring your progress on this the last few days...

Since the machine is new, the chances of component failure are very low. More than likely a single wire is causing the problem, and this is usually at the main control board (CCU). My tech sources at WP say that there have been a few problems associated with the way the wiring harness was crimped into the connectors at the control board. If the dispenser wiring is somehow misdone, it could generate the code you are seeing because the dispenser is not being energized as it should. You may need to verify voltage at the dispenser to confirm this, but a good visual check of the connections will also help, especially at the control harness. Make sure all the plastic connectors are firmly pushed into the corresponding slots on the control.
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

 

Whirlpool electronic error code

Started by roxgirl

Replies: 1
Views: 5986
Last post July 25, 2007, 08:15:36 PM
by AJ
Lid Switch error

Started by patron

Replies: 9
Views: 5902
Last post March 12, 2008, 02:49:25 PM
by patron
Whirlpool Duet Sport Error f-01

Started by Ology

Replies: 2
Views: 7846
Last post March 10, 2008, 05:20:36 PM
by Repair-man
Whirlpool Duet Washer - F-30 error code and clunking noise in detergent area.

Started by AJ

Replies: 3
Views: 14760
Last post November 15, 2009, 09:34:58 AM
by AJ
Kitchenaid Washer F11 Error Code

Started by TechnicianBrian

Replies: 0
Views: 5892
Last post March 23, 2008, 07:06:27 AM
by TechnicianBrian
6th sense AWM 8143 6kg Error F09 - here's a challenge for you!

Started by Neeky

Replies: 31
Views: 12022
Last post April 08, 2008, 10:15:35 PM
by Neeky