Unit gets to the rinse cycle and just turns off because it will not drain water from the tub. Unhooked all the drain tubes and checked for blockages and there are none, it doesn't even sound like it is trying to come on. I unhooked both the drain pump and the circulation pump and cleaned out what little gunk was in there and it did the same thing,
Pulled out the multi meter and the drain pump is testing at 14.5 so it is within spec but even when i run it in the QC mode and go to test the drain pump it makes no noise, same when i try to test the circulation pump, nothing.
Could this still be just the drain pump going bad? Are there any other tests I can run on it, or anything else I should be looking for?