Just installed it last night. It filled, ran a bit through the auto wash cycle and then I cancelled the cycle. It drained, beeped to indicate it had finished so I loaded it and added detergent/rinse aid. Went to start it and the display read "0" while the sanitize and auto wash buttons were lit. Ran through the steps to reset/cancel but the other buttons do not respond. Delay start was not engaged nor does the button light up/respond.
There was a normal amount of water under the screen but I bailed it just in case. Nothing. Drained water from waste hose. Nothing. Per a local repair place, threw the breaker for 15 minutes then powered back on to see if it would reset. Same problem continues.
My normal sources for appliance diagnostics/troubleshooting does not seem to have any PDFs to consult while Bosch customer service was going to just run through the same owner's manual steps I had already done. We can't get anyone out to look at it until 24 July at the earliest so any help would be appreciated.