I need a maytag top loader manual

[JWWebster]

I need a manual for a maytag top loader about 6 years old
It has a the gold maytag insignia on it and the fancy sloped front end. The main bearing has a roar in it. The motor has a quick plug.
It has a standard 21001906 pump

[apptech]

JW,

Anyway you can get that model number?

[JWWebster]

I have it crammed way back in the shop a couple of compressors setting it, The tiller and some crap all are blocking me. 2 weeks ago my friend brought his moms leaky washer over to the shop. The kit he bought had the upper and lower seal complete. We changed out the water seal and hub and he gave me the lower bearing kit(what was left of it anyway). I want to see if i can use this part on my old washer if I someday get a motor. Did I mention my kids and the river killed this washer.. That's a long story concerning a hurricane called Katrina.

[Repair-man]

If it has a sloped front it is the MAV series (Atlantis).

The current part numbers for the lower seal and bearing kit are: 12001598 and 21002237

16010358 Maytag Atlantis III Service Repair Manual


Part # 12001598 Tub Seal Assembly, AP4009444





Part # 21002237 Tub & Seal Kit, AP4025154

[JWWebster]

Thank RM by the way how tough is it to replace that loud bearing. It is so load we own a detached garage/shop. I can hear the washer spinning while watching football in the living room on the other side of the house and the whole neighborhood for that matter

[Repair-man]

Easy enough...I just remove the agitator and spin basket, remove the hub, remove the 6 tub springs and disconnect the hoses (air and pump). The you remove the 4 bolts under the hub and the 6 that hold the tub suport plate to the milk stool by rotating the stool around. The tub comes off, the support plate comes off, the new bearing goes on...presto!