Author Topic: How do you keep a dryer drum securely in place?  (Read 4128 times)

Offline ZzzonkOwl

  • VIP Member
  • Member Since: Jun 2014
  • Posts: 10
How do you keep a dryer drum securely in place?
« on: June 27, 2014, 03:58:34 PM »
How do you keep the dryer drum from falling forward?  My model is Roper RED4440VQ1.  Drum support rollers and belt are in place, but it still falls forward. 
Thank you so much.  This is driving me insane.

Offline dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 1503
  • Country: us
Re: How do you keep a dryer drum securely in place?
« Reply #1 on: June 27, 2014, 04:48:32 PM »
Sounds like you don,t have belt on pulley right.Watch the video.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9435
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: How do you keep a dryer drum securely in place?
« Reply #2 on: June 27, 2014, 04:54:22 PM »
Or do you mean it falls forward before you get the front of the dryer back on?
If so you need to hold the drum in place well you install the front of the dryer.
I hold the drum in place with my left hand by placing my hand at the top rear of the drum and use my right hand to put the front back on.

Can be a bit tricky, but I have done it this way hundreds of times over the years. If nothing else get a helper so you have a extra set of hands.
Hope you find our site helpful.

Offline ZzzonkOwl

  • VIP Member
  • Member Since: Jun 2014
  • Posts: 10
Re: How do you keep a dryer drum securely in place?
« Reply #3 on: June 27, 2014, 05:24:41 PM »
Really?  In all these videos I've been watching, it just sits in place by itself, without having to put the front back on. 
Are you sure that's okay?

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9435
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: How do you keep a dryer drum securely in place?
« Reply #4 on: June 27, 2014, 05:35:09 PM »
Just sharing how I do it. Maybe there is a better way, but don't think it's any big deal to help hold it in place well you put the front back on.
Hope you find our site helpful.

Offline Maintech

  • Technician
  • Member Since: Mar 2014
  • Posts: 74
Re: How do you keep a dryer drum securely in place?
« Reply #5 on: June 27, 2014, 05:50:43 PM »
on most dryers I get the drum in place with the belt around it , then looking through the drum I turn it slowly making sure it is seated on the rollers and the felt seal is correct then I get the belt around the motor pulley and tensioner , generally at that point it stays pretty much in place and the front end only drops slightly, I then just slide the front on.

Offline ZzzonkOwl

  • VIP Member
  • Member Since: Jun 2014
  • Posts: 10
Re: How do you keep a dryer drum securely in place?
« Reply #6 on: June 27, 2014, 05:52:06 PM »
Basically the drum would completely fall off if it didn't have the sides of the dryer to hold it up a little bit!

Offline Bailey

  • Technician
  • Member Since: Dec 2011
  • Posts: 651
  • Country: us
Re: How do you keep a dryer drum securely in place?
« Reply #7 on: June 27, 2014, 05:57:59 PM »
In the picture I don't see the belt.Are you putting it to far forward? That would pull it down.

Offline ZzzonkOwl

  • VIP Member
  • Member Since: Jun 2014
  • Posts: 10
Re: How do you keep a dryer drum securely in place?
« Reply #8 on: June 27, 2014, 06:06:53 PM »
Nope, I put it on the little belt track mark.

Offline Bailey

  • Technician
  • Member Since: Dec 2011
  • Posts: 651
  • Country: us
Re: How do you keep a dryer drum securely in place?
« Reply #9 on: June 28, 2014, 09:46:36 AM »
They always tip down a little. I wouldn't worry about it as long as it works after it is put back together.

Offline ZzzonkOwl

  • VIP Member
  • Member Since: Jun 2014
  • Posts: 10
Re: How do you keep a dryer drum securely in place?
« Reply #10 on: June 28, 2014, 09:49:52 AM »
It's not just a little...it would fall out if the sides of the dryer didn't stop it.  So I should try to just put the front back on and see what happens?  Thanks so much for all your help, guys!

Offline dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 1503
  • Country: us
Re: How do you keep a dryer drum securely in place?
« Reply #11 on: June 28, 2014, 09:58:39 AM »
You sure you got belt on the pulley Right?? What are the part numbers for the parts you are putting in?
« Last Edit: June 28, 2014, 10:03:27 AM by dab147315 »

Offline ZzzonkOwl

  • VIP Member
  • Member Since: Jun 2014
  • Posts: 10
Re: How do you keep a dryer drum securely in place?
« Reply #12 on: June 28, 2014, 10:03:17 AM »
Yup :)  I made sure.  At first I thought the belt was stretched from maybe too large of loads, but I saw it doesn't stretch, it will just rip if it's broken.

Offline keithvibe

  • Technician
  • Member Since: Apr 2014
  • Posts: 187
  • Country: us
    • Buy me a beer through paypal
Re: How do you keep a dryer drum securely in place?
« Reply #13 on: June 28, 2014, 10:16:41 AM »
can you get a photo of your belt routing (around the motor and idler pully)and post that?

Offline ZzzonkOwl

  • VIP Member
  • Member Since: Jun 2014
  • Posts: 10
Re: How do you keep a dryer drum securely in place?
« Reply #14 on: June 28, 2014, 10:20:10 AM »
Sure just a minute :)

 

Dryer drum baffle melted off?????????

Started by yabadabadoo1026

Replies: 2
Views: 2720
Last post January 29, 2008, 09:34:25 PM
by rickgburton
White Westinghouse Dryer Drum Not Turning

Started by TechnicianBrian

Replies: 0
Views: 4292
Last post May 09, 2008, 09:50:14 PM
by TechnicianBrian
LG Dryer DLE5932W Drum replacement

Started by James01

Replies: 2
Views: 12245
Last post November 03, 2008, 02:00:00 PM
by James01
DLE5932W Direction dryer drum to turn

Started by pllister

Replies: 3
Views: 5483
Last post January 11, 2009, 08:29:08 PM
by RegUS_PatOff
LG Dryer Drum Rumble

Started by Kranky

Replies: 5
Views: 8002
Last post February 06, 2009, 12:38:50 PM
by Kranky
Roper Dryer - heating without drum rotation

Started by tsitalon1

Replies: 11
Views: 5637
Last post February 09, 2009, 01:27:47 PM
by tsitalon1