Maytag Electric Range

[Bill]

I am looking for and electrical diagram for this range and some possible tech tips. This range will broil and clean. It goes into bake mode and everything appears to work with the controller when I set it to 350. No error codes. Temp will only get up to about 110F but I can hear the relays cycling on and off on the control. Unit never gets power to bake element but has power to broil element for approx 6 seconds. I suspect the ERC is bad but want to be sure I am not over looking anything since this is a $250. plus part. Thanks for any help.


Model MERH865RAW

[whirlpooltech]

I can not seem to find a diagram on that model number are you sure that is the correct number?

If you do not have power to the bake element and can trace the wires from the bake element back to the control (ERC) I would look at replacing the control too.

[apptech]

If this is the maytag oven with the hidden bake element make sure you check that bake element too.

I see a lot of maytag hidden style bake elements go bad and damage the ERC

[AJ]

That is a good model number, but I also could not find a diagram.

I believe whirpooltech and apptech are correct.

Here are your factory part numbers linked to RepairClinic so you can check prices online.

W10141433  Control W/Overlay (Black) 
W10141422  Control W/Overlay (Bisque) 
W10141425  Control W/Overlay (White)

74011117  Element, Bake

At the time I checked the control it was not in stock, but for the price difference it maybe with the little extra time you would have to wait for it.