Author Topic: Frigidaire Freezer not Cold Enough  (Read 6402 times)

Offline TechnicianBrian

  • Technician
  • Member Since: Dec 2007
  • Posts: 390
  • Country: us
Frigidaire Freezer not Cold Enough
« on: July 07, 2008, 07:40:49 AM »

Model #FFU1464FW1, the customer just had this freezer installed and after a couple days noticed that it didn't seem to be as cold as they expected. There tool for determining the proper temperature was the gallon container of ice cream that was soft. Not a truly accurate measuring device, but effective in this case.

Check the Easy Stuff First
Once I opened the door, I noticed this unit seemed very quiet for a freezer and there was no sound coming from the evaporator, which told me the fan wasn't running. A few screws and the evaporator cover was out of the way, and sure enough, the fan was just sitting there stuck. A quick inspection showed that some excess cavity insulation had made its way to the back liner of this unit and lodged itself at just the right spot to cause trouble. Once the foam was removed, the fan took off running, and now this freezer is keeping the ice cream just the way I like it, er, the way they like it.



Frigidaire S x S Refrigerator/Freezer smells like burning and fridge not cold

Started by cecil_23_100

Replies: 1
Views: 1662
Last post August 13, 2013, 09:27:35 PM
by ontimeappliance
Frigidaire Freezer FFU14FC7CB0 stopped being cold

Started by kanddmama

Replies: 5
Views: 1297
Last post August 23, 2013, 10:15:45 PM
by theoldstoveguy
Frigidaire Refrigerator to Cold

Started by TechnicianBrian

Replies: 4
Views: 4317
Last post August 21, 2014, 01:19:59 PM
by JB007
Frigidaire Freezer not Cooling

Started by TechnicianBrian

Replies: 0
Views: 10402
Last post August 30, 2008, 07:54:56 AM
by TechnicianBrian
Amana Refrigerator Cold Freezer, Warm Refrigerator

Started by TechnicianBrian

Replies: 0
Views: 8293
Last post September 18, 2008, 07:34:24 AM
by TechnicianBrian
Refrigerator too cold and things melt in freezer

Started by ryanpd

Replies: 2
Views: 3959
Last post December 08, 2008, 08:50:28 PM
by RegUS_PatOff