Amana, Jenn-Air, KitchenAid, Maytag and Whirlpool SXS Refrigerators in Door Ice Maker Troubleshooting Guide
GSC25C4EYB00, GSC25C4EYB01, GSC25C4EYB02, GSC25C4EYW00, GSC25C4EYW01, GSC25C4EYW02, GSC25C4EYY00, GSC25C4EYY01, GSC25C4EYY02, GSC25C4EYY03, GSC25C5EYB00, GSC25C5EYB01, GSC25C5EYB02, GSC25C5EYW00, GSC25C5EYW01, GSC25C5EYW02, GSC25C5EYY00, GSC25C5EYY01, GSC25C5EYY02, GSC25C5EYY03, GSF26C4EXB00, GSF26C4EXB02, GSF26C4EXF00, GSF26C4EXF02, GSF26C4EXS00, GSF26C4EXS02, GSF26C4EXS03, GSF26C4EXT00, GSF26C4EXT02, GSF26C4EXW00, GSF26C4EXW02, GSF26C4EXY00, GSF26C4EXY02, GSF26C4EXY03, GSF26C5EXB00, GSF26C5EXB02, GSF26C5EXW00, GSF26C5EXW02, GSF26C5EXY00, GSF26C5EXY02, GSF26C5EXY03, GSS26C4XXB00, GSS26C4XXB02, GSS26C4XXB03, GSS26C4XXF00, GSS26C4XXF02, GSS26C4XXF03, GSS26C4XXW00, GSS26C4XXW02, GSS26C4XXW03, GSS26C4XXY00, GSS26C4XXY02, GSS26C4XXY03, GSS26C4XXY04, GSS26C5XXB00, GSS26C5XXB02, GSS26C5XXB03, GSS26C5XXW00, GSS26C5XXW02, GSS26C5XXW03, GSS26C5XXY00, GSS26C5XXY02, GSS26C5XXY03, GSS26C5XXY04, ISC23CDEXB00, ISC23CDEXB01, ISC23CDEXY00, ISC23CDEXY01, ISC23CDEXY02, ISC23CNEXW00, ISC23CNEXW01, ISC23CNEXY00, ISC23CNEXY01, ISC23CNEXY02, JSC24C8EAM00, JSC24C8EAM01, JSC24C8EAY00, JSC24C8EAY01, KSC23C8EYB00, KSC23C8EYB02, KSC23C8EYW00, KSC23C8EYW02, KSC23C8EYY00, KSC23C8EYY01, KSC23C8EYY02, KSC23C8EYY03, KSC23C9EYB00, KSC23C9EYB02, KSC23C9EYW00, KSC23C9EYW02, KSC23C9EYY00, KSC23C9EYY01, KSC23C9EYY02, KSC24C8EYB00, KSC24C8EYB01, KSC24C8EYB02, KSC24C8EYP00, KSC24C8EYP01, KSC24C8EYP02, KSC24C8EYP03, KSC24C8EYW00, KSC24C8EYW01, KSC24C8EYW02, KSC24C8EYY00, KSC24C8EYY01, KSC24C8EYY02, KSC24C8EYY0, KSF26C4EXA00, KSF26C4EXB00, KSF26C4EXS00, KSF26C4EXS01, KSF26C4EXW00, KSF26C4EXY00, KSF26C4EXY01, KSF26C4XYB00, KSF26C4XYB02, KSF26C4XYB03, KSF26C4XYW00, KSF26C4XYW02, KSF26C4XYW03, KSF26C4XYY00, KSF26C4XYY01, KSF26C4XYY02, KSF26C4XYY03, KSF26C4XYY04, KSF26C5XYB00, KSF26C5XYW00, KSF26C5XYY00, KSF26C5XYY01, KSF26C6XYW00, KSF26C6XYY00, KSF26C6XYY01, KSF26C6XYY02, KSF26C6XYY03, KSF26C6XYY04, KSF26C6XYY05, KSF26C7X7701, KSF26C7XYY00, KSF26C7XYY01, KSF26C7XYY02, KSF26C7XYY03, KSF26C7XYY04, KSF26C7XYY05, MSB27C2XAB00, MSB27C2XAM00, MSB27C2XAM01, MSB27C2XAW00, WRL767SIAM00, WRL767SIAM01, WRS526SIAE00, WRS526SIAH00, WRS537SIAB00, WRS537SIAE00, WRS537SIAF00, WRS537SIAH00, WRS537SIAM00, WRS537SIAM01, WRS537SIAW00, WRS571CIDM00, WRS576FIDB00, WRS576FIDM00, WRS576FIDW00, WRS586FIDE00, WRS586FIDH00, WRS586FIDM00, WRS950SIAB00, WRS950SIAE00, WRS950SIAH00, WRS950SIAM00, WRS950SIAM01, WRS950SIAW00, WRS965CIAE00, WRS965CIAH00, WRS965CIAM00, WRS965CIAM01, WSF26C2EXB00, WSF26C2EXB01, WSF26C2EXF00, WSF26C2EXF01, WSF26C2EXF03, WSF26C2EXW00, WSF26C2EXW01, WSF26C2EXY00, WSF26C2EXY01, WSF26C2EXY02, WSF26C3EXB00, WSF26C3EXB01, WSF26C3EXF00, WSF26C3EXF01, WSF26C3EXF03, WSF26C3EXW00, WSF26C3EXW01, WSF26C3EXY00, WSF26C3EXY01, WSF26C3EXY02.
Assist in correct Ice Maker diagnosis.
Theory of operation, SxS product IDI
After the freeze cycle time has elapsed (36 minutes for normal operation and 29 minutes for Acceler-Ice), the main control board will send 120VAC to the ice maker.
When the ice maker thermostat senses a temperature of 17° +/- 3°F, the thermostat closes.
At this point the current now has a path through the thermostat to the motor. (The motor rotates the drive gear. Inside the module there are copper contacts that ride on copper strips and are driven by the drive gear. As the drive gear rotates, the contacts will make or break circuits to control the ice maker operation).
The motor will start rotation and the mold heater is turned on.
The ejector fingers will stall on the ice cubes until the heater warms the mold to release the ice.
The ejector fingers push the ice out of the mold.
After the ice is ejected, the motor continues to rotate the drive gear.
The water valve is then energized for 7.5 seconds
As the water valve is energized, a signal is sent to the main board which turns on the water inlet tube heater (This heater will stay on for 40 minutes).
Every time a harvest occurs and the ice maker fills, the heater will come on again for 40 minutes. When the ice bin is full, the heater will not be energized. This may cause the ice maker water fill tube to freeze over a period of time.
Once ice is used from the ice bucket and the level of the ice drops below the infrared beam, ice harvesting will begin again.
The ice will be removed from the mold and the ice maker fill tube heater will turn on when the water fill valve is energized.
Note: Because the ice maker fill tube is frozen, it may take one to two cycles to thaw the ice maker inlet tube line.
See Attached Pointer for full troubleshooting Guide.https://www.dropbox.com/s/kv3m3yhayekcuyn/W10687894.pdf