Author Topic: Danby ice maker troubles  (Read 567 times)

Offline Ahundley

  • VIP Member
  • Member Since: Jun 2014
  • Posts: 2
Danby ice maker troubles
« on: June 10, 2014, 08:44:06 PM »
I have a Danby ice maker DIM3225blsst with error code of low water.  I found the circulation pump was sticking.  I freed the impeller and it worked for a while and stopped.  So I replaced pump and turned on....after a while of running it seemed to cool the water and then heat up.  I then replaced the control board.  No luck....still have the low water error code.  Any help would be great!

 

Video: See if your Whirlpool Ice maker infrared optics control is working.

Started by AJ

Replies: 2
Views: 43526
Last post August 01, 2007, 12:21:37 PM
by AJ
ED27DQXB01 Do I need to replace the ice maker?

Started by galen

Replies: 5
Views: 3899
Last post August 27, 2007, 07:47:38 PM
by AJ
Video: Testing - Connect and disconnect a push-in ice maker water fill valve

Started by AJ

Replies: 0
Views: 17359
Last post July 30, 2007, 05:53:38 PM
by AJ
Video: Whirlpool In-Door Ice Maker Fill Cycle

Started by AJ

Replies: 3
Views: 9518
Last post September 23, 2008, 05:37:19 PM
by Al Capone
Video: How to make your Whirlpool ice maker run for testing and diagnostics

Started by AJ

Replies: 10
Views: 43524
Last post April 16, 2013, 10:40:23 PM
by charlenemhj
Kenmore 106.52552100 ice maker problems

Started by philhyde

Replies: 8
Views: 10843
Last post August 16, 2007, 07:33:28 AM
by philhyde