Author Topic: Maytag mah8700AWW control board doesnt power up  (Read 568 times)

Offline Awalker

  • VIP Member
  • Member Since: May 2014
  • Posts: 10
Maytag mah8700AWW control board doesnt power up
« on: May 29, 2014, 07:36:56 PM »
I have a maytag Neptune MAH8700AWW that quit working. I read through the manual and I have 120vac at 1 and 3 of CN5 and 120vac at 1 of CN5 and 1 of CN6. Unit had been powering up intermitently and now will not power up at all.
 Does this indicate bad control board? If so is there anything else I need to check prior to replacing the board?I purchased it new in 2005, had vibrating issues once or twice but it seems resolved for now. Is this worth fixing?where is the best place to buy a control board?

Thanks for the help,

Walker

Online tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1528
  • Country: us
    • Buy me a beer through paypal
Re: Maytag mah8700AWW control board doesnt power up
« Reply #1 on: May 29, 2014, 09:23:17 PM »
It sounds like it's the control board.  You can try resoldering the power connections.  We'll need the serial number to determine which board it needs.  The best place to buy parts is appliancepartspros.com and repairclinc.com because they have good prices and help support the site.

Offline Awalker

  • VIP Member
  • Member Since: May 2014
  • Posts: 10
Re: Maytag mah8700AWW control board doesnt power up
« Reply #2 on: May 30, 2014, 11:34:04 AM »
Serial number is 12016399GV, so I believe it to be a 34001495.

 

22002989 Maytag Neptune Control Board

Started by AJ

Replies: 0
Views: 5246
Last post March 07, 2009, 11:48:25 PM
by AJ
34001498 Maytag Front Load Washer Control Board

Started by AJ

Replies: 0
Views: 3452
Last post June 16, 2009, 01:03:57 PM
by AJ
25001218 Maytag Top Load Washer Control Board

Started by AJ

Replies: 0
Views: 2735
Last post June 16, 2009, 01:49:18 PM
by AJ
25001079 Maytag Washer Motor Control Board

Started by AJ

Replies: 0
Views: 2918
Last post June 16, 2009, 01:53:57 PM
by AJ
Maytag Neptune does not spin - replaced control board looks OK

Started by sgwfromBG

Replies: 3
Views: 2625
Last post October 01, 2009, 06:06:32 PM
by sgwfromBG
neptune washer- machine control board repair

Started by inot66

Replies: 7
Views: 4030
Last post July 13, 2013, 10:15:59 PM
by def