Had a recall on this fridge today.
Org call, no cold in the FF.
Same call today, no cold in the FF
I was out on this over a month ago. The damper assembly was stuck closed. Frost pattern was fine. Replaced the damper assembly. Been good for over a month now.
Go back today put it in diagnostic. Everything checked out ok as it did last time.
I pulled the wall in the freezer to check evap. 90% frosted over. Return vents are both blocked.
Forced defrost, Defrost terminator is closed but no power from the main board to the heating element.
Going back with a new board.
Can anyone tell me if they have had issues with this model?