Author Topic: Maytag atlantis intermittently halts prior to rinse cycle  (Read 458 times)

Offline jdub39

  • VIP Member
  • Member Since: May 2014
  • Posts: 1
I have a Maytag Atlantis MAV6257AWW washer that intermittently stops (50% of the time) at the final rinse cycle.

It seems it does it more often on the "super" water level than others (or maybe I just use that the most)


In order to get it to start filling for the final rinse cycle, I simple press the knob and then pull it out and it starts again...

Where do I start troubleshooting??


Thanks!!
Jimmy

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1509
  • Country: us
    • Buy me a beer through paypal
Re: Maytag atlantis intermittently halts prior to rinse cycle
« Reply #1 on: May 21, 2014, 03:13:18 PM »
Sounds like a bad timer, 22003371.

Offline romanowski72

  • Technician
  • Member Since: Dec 2011
  • Posts: 36
Re: Maytag atlantis intermittently halts prior to rinse cycle
« Reply #2 on: May 21, 2014, 10:47:12 PM »
Sounds like a timer to me also.  Does it even fill or start to fill with water or does it spin out and then just stop?  You can check the water valve for 120v. I also assume this is something that you came home and noticed machine was stuck on rinse.  I ask because some machines will have a motor cool down period, and maytags sometimes I have seen go couple minutes.
But it sounds like timer to me.
So if the valve is not getting 120v then timer is going bad.

 

Maytag Atlantis stopped during rinse cycle, now completely dead

Started by DrPop

Replies: 6
Views: 2260
Last post March 29, 2013, 04:07:17 PM
by fairbank56
Maytag MAH4000 does not go into Rinse-Cycle Intermittent-Issue

Started by granaudio

Replies: 4
Views: 5941
Last post April 22, 2009, 10:36:19 PM
by granaudio
maytag Atlantis washer timer switch doesn't activate spin cycle

Started by helpme805

Replies: 6
Views: 7608
Last post July 30, 2011, 08:35:12 PM
by AJ
Maytag Neptune Stack Leaks from door during rinse cycle

Started by Jaytag

Replies: 10
Views: 4962
Last post March 30, 2011, 09:54:11 AM
by AJ
Maytag washer- RINSE/SPIN CYCLE FAILURE

Started by bizrapspin

Replies: 10
Views: 5506
Last post November 16, 2010, 01:05:42 PM
by ryan111
Maytag Centennial TL won't Fill during Wash/Rinse Cycle (MVWC6ESWW1)

Started by rockinrobin

Replies: 2
Views: 1820
Last post April 25, 2013, 09:06:50 PM
by AJ