Author Topic: Dryer Maytag MDE4806 acts like no power  (Read 1581 times)

Offline dgs119

  • VIP Member
  • Member Since: May 2014
  • Posts: 1
Dryer Maytag MDE4806 acts like no power
« on: May 19, 2014, 10:01:28 AM »
We did have a whole house power failure before I noticed the problem:
I checked voltage at the receptacle on wall .. is reading proper voltage 240vac.
open door .. inside light DOES NOT come on. switch does click.
No status lights come on, on the control panel.

pulled front off to check the door switch.. does pass continuity test.
I also checked the thermal fuse .. it IS NOT OPEN.

any ideas?
wondering if the controller board is bad... how to test?.
But it does not look like that should affect the interior lamp.


Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1526
  • Country: us
    • Buy me a beer through paypal
Re: Dryer Maytag MDE4806 acts like no power
« Reply #1 on: May 20, 2014, 08:55:03 PM »
You're right, the door light is controlled by the door switch, not the control board.  Do you have 120vac from hot to neutral? Check for 120vac at 13 and 15 at the PS5 plug on the control board.  If the traces from 13 and 15 go straight to the transformer, check the continuity of the primary winding.

 

Maytag dryer acts like it has no power

Started by Nelson

Replies: 3
Views: 2602
Last post March 30, 2012, 02:36:55 AM
by RegUS_PatOff
LDG7304 Maytag Dryer - making a lot of noise.

Started by robert

Replies: 5
Views: 8224
Last post February 20, 2011, 07:33:06 PM
by jumptrout51
Maytag Dryer Problem

Started by jborden

Replies: 10
Views: 9323
Last post August 15, 2007, 12:06:18 PM
by AJ
Video: How to check voltage at cord on a Maytag electric dryer.

Started by AJ

Replies: 0
Views: 7998
Last post July 31, 2007, 12:38:27 PM
by AJ
maytag neptune dryer is really noisy

Started by joy

Replies: 1
Views: 5242
Last post October 09, 2007, 07:43:45 AM
by AJ
Maytag Neptune Dryer 4000 noise

Started by sparky823

Replies: 14
Views: 8439
Last post November 28, 2007, 10:36:02 PM
by sparky823