Get Answers to your Appliance Repair Questions

Washer PartsDryer PartsRefrigerator PartsDishwasher PartsRange & Oven PartsAll Appliance Parts

Author Topic: Is this an error on the Whirlpool Cabrio Tech Sheet?  (Read 1513 times)

Offline johnboy3

  • Technician
  • Member Since: Nov 2012
  • Posts: 172
  • Country: us
Is this an error on the Whirlpool Cabrio Tech Sheet?
« on: May 13, 2014, 08:43:27 PM »
This afternoon I had a call on a Cabrio (WTW6600SW2) showing an F50 (Motor stalled) error.   The lower harness continuity checks OK, but tech sheet says 16 ohms between any 2 of the motor leads and this motor shows 32 ohms.  The wiring diagram shows 3 windings at 16 ohms each, making it appear that measuring A-B,B-C, or A-C should show 32 ohms not 16 as the instructions say. Do I have a bad motor, or a bad tech sheet?

Offline Maintech

  • Technician
  • Member Since: Mar 2014
  • Posts: 178
  • Country: us
  • LNM Service and Repair LLC.
    • Buy me a beer through paypal
Re: Is this an error on the Whirlpool Cabrio Tech Sheet?
« Reply #1 on: May 14, 2014, 08:43:19 PM »
Tech sheet misprint... according to whirlpool cabrio job aid it should be 31 ohm


Whirlpool Cabrio Washer F51 Error

Started by TechnicianBrian

Replies: 8
Views: 35926
Last post October 29, 2015, 04:16:24 PM
by AJ
Whirlpool Cabrio F-50 Error

Started by blondejon

Replies: 12
Views: 4287
Last post February 16, 2012, 10:13:02 PM
by blondejon
Whirlpool Cabrio F 71 Error Over Suds

Started by blondejon

Replies: 5
Views: 10021
Last post May 16, 2012, 08:06:37 PM
by blondejon
Whirlpool WFW9200SFQA12 washer tech sheet

Started by brad

Replies: 0
Views: 1027
Last post November 04, 2013, 02:19:40 PM
by brad
Whirlpool Cabrio - ERROR CODES ??

Started by Blaiser

Replies: 2
Views: 2221
Last post November 21, 2013, 06:51:01 AM
by Blaiser
Whirlpool Cabrio lid locked error code E1 F2.

Started by Bat65

Replies: 3
Views: 2912
Last post April 09, 2014, 04:44:41 PM
by Select Appliance