Author Topic: What's on your tool wish list?  (Read 10827 times)

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9589
  • Country: us
    • ApplianceJunk.com - Appliance Repair
What's on your tool wish list?
« on: April 29, 2014, 10:47:17 AM »
Maybe it's a new multimeter, tool bag, power tool or some hand tool.

If there is enough interest in a tool on your wish list I may look at purchasing one myself to use, review or even raffle off or giveaway.
Hope you find our website helpful.

Offline domain

  • Technician
  • Member Since: Nov 2012
  • Posts: 1072
  • Country: us
Re: What's on your tool wish list?
« Reply #1 on: April 29, 2014, 08:52:17 PM »
It was a nice flashlight. Thanks AJ. :thanks: :thanks:

Offline RAH52

  • Technician
  • Member Since: Aug 2008
  • Posts: 716
  • Country: ca
Re: What's on your tool wish list?
« Reply #2 on: May 03, 2014, 07:10:43 AM »
I'm trying to get my hands on a

Hilmor QCND 1/4" + 5/16" Quick Change Magnetic Nut Driver .As I get older I am trying to reduce the weight of tools in my bag and think this would be a great addition because most nuts are either 1/4 or 5/16 .The problem is it's not available in Canada .I have a amazon.com account but for some reason they won't ship this product to Canada .Looking to find someone in the states who will buy it for me and ship it to me .I would prepay the costs involved into their paypal account .



Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9589
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: What's on your tool wish list?
« Reply #3 on: May 03, 2014, 07:35:53 AM »
This one?

Hilmor QCND 1/4" + 5/16" Quick Change Magnetic Nut Driver

Quote
Looking to find someone in the states who will buy it for me and ship it to me.

I could do that for you.
Hope you find our website helpful.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9589
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: What's on your tool wish list?
« Reply #4 on: June 20, 2014, 04:20:44 PM »
I'm trying to get my hands on a

Hilmor QCND 1/4" + 5/16" Quick Change Magnetic Nut Driver .As I get older I am trying to reduce the weight of tools in my bag and think this would be a great addition because most nuts are either 1/4 or 5/16 .The problem is it's not available in Canada .I have a amazon.com account but for some reason they won't ship this product to Canada .Looking to find someone in the states who will buy it for me and ship it to me .I would prepay the costs involved into their paypal account .

Finally got it shipped to you. Looks like a fine tool.
Got to say it was very tempting to bust open the blister pack so I could try it out, but I held back, lol...

Let me know when you get it and how you like it.


 :cheers:

Hope you find our website helpful.

Offline RAH52

  • Technician
  • Member Since: Aug 2008
  • Posts: 716
  • Country: ca
Re: What's on your tool wish list?
« Reply #5 on: June 20, 2014, 06:55:14 PM »
Will do  AJ .....my birthdays coming up Monday and I'm going to treat myself to a Veto Pro pac LC  tool bag . Been at this game a long time (since I was 22 ) and I'm turning 62 ! I figured I'd go out in style ...figure I'm going to work another three years and then retire so for once in my career I'd like a classy tool carrier .If I have no clue how to fix an appliance at least I'll look like I do .I like the fact that this new tool bag will have a spot for everything ,including meters and my drill .This way it will help me to remember not to leave tools at the customers home .I will rate the bag once it arrives .

Online keithvibe

  • Technician
  • Member Since: Apr 2014
  • Posts: 248
  • Country: us
    • Buy me a beer through paypal
Re: What's on your tool wish list?
« Reply #6 on: June 21, 2014, 07:40:28 AM »
I have the veto... great bag but it is very heavy for the daily stuff. The down fall for the veto is the zippers. The dryer lint does a number on the zippers. Got to stay on top of keeping it clean.

Offline RAH52

  • Technician
  • Member Since: Aug 2008
  • Posts: 716
  • Country: ca
Re: What's on your tool wish list?
« Reply #7 on: June 21, 2014, 11:29:02 AM »
I'd rather have a bit heavier bag then 2 or 3 trips to the truck

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9589
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: What's on your tool wish list?
« Reply #8 on: June 21, 2014, 11:31:39 AM »
Happy Birthday RAH52


 :cheers:
Hope you find our website helpful.

Offline tch_tech

  • Technician
  • Member Since: May 2009
  • Posts: 87
  • Country: us
Re: What's on your tool wish list?
« Reply #9 on: June 23, 2014, 08:11:18 PM »
my birthdays coming up Monday and I'm going to treat myself to a Veto Pro pac LC  tool bag . Been at this game a long time (since I was 22 ) and I'm turning 62 !

Happy Birthday, RAH62.  :cheers:

I mean RAH52.

Did you et the Veto yet?
« Last Edit: June 23, 2014, 08:13:32 PM by tch_tech »

 

Tool Wish List

Started by AJ

Replies: 25
Views: 6366
Last post December 25, 2013, 12:42:04 PM
by scottg
Tool work-arounds, or substitutions?

Started by andersenappliance

Replies: 8
Views: 4420
Last post September 16, 2014, 12:59:05 PM
by Risen
Agi-tamer tool wanted to buy!

Started by luiz09

Replies: 4
Views: 3838
Last post February 02, 2014, 09:35:27 AM
by AJ
What is this tool for? (see pic)

Started by Tony Fuentes

Replies: 3
Views: 3427
Last post March 28, 2014, 12:05:25 PM
by AJ
Can anyone show or tell me how to use this tool? (Maytag Spring Removal Tool)

Started by Tony Fuentes

Replies: 5
Views: 3935
Last post April 12, 2014, 03:21:11 PM
by Wedgeman55
Do you really care where a tool is made?

Started by AJ

Replies: 16
Views: 6171
Last post June 19, 2014, 09:15:47 PM
by tch_tech