365-Day Hassle Free Return Policy!  ·  AppliancePartsPros.com
Washer PartsDryer PartsRefrigerator PartsDishwasher PartsRange & Oven PartsAll Appliance Parts

Author Topic: Frigidaire washer model FAFW380ILW3- stops in mid cycle  (Read 900 times)

Offline tcape

  • VIP Member
  • Member Since: Jun 2009
  • Posts: 76
Frigidaire washer model FAFW380ILW3- stops in mid cycle
« on: March 19, 2014, 04:31:58 PM »
Customer calls and says the washer stops in mid cycle, and she has to push the start switch again and it will pick up where it left off. Sometimes she has to do this a few times to get it thru the cycle. Any ideas? I've never experiencewd this issue before.

Thanks for any direction

Offline Wilson13

  • Technician
  • Member Since: Mar 2014
  • Posts: 57
  • Country: us
  • 20+ years appliance service tech,owner from 2002
Re: Frigidaire washer model FAFW380ILW3- stops in mid cycle
« Reply #1 on: March 20, 2014, 03:24:20 PM »
check for slow fill, hot and cold, clean screens, check for obstruction in pump and drain hose. If the fill and drain are ok I would suspect a control or door switch issue.
« Last Edit: March 20, 2014, 03:28:00 PM by Wilson13 »


Frigidaire Affinity Washer stops mid cycle

Started by Luigi

Replies: 2
Views: 6339
Last post March 28, 2013, 07:48:27 AM
by jumptrout51
Front Loading Washer Model#WCVH6800J1MR Stops before going into spin cycle

Started by sertich11

Replies: 4
Views: 2862
Last post July 02, 2012, 04:07:23 PM
by rego
Frigidaire Washer - Noisy During Drain Cycle.

Started by AJ

Replies: 0
Views: 4757
Last post December 27, 2007, 07:54:12 PM
by AJ
frigidaire washer smoking and only spins on rinse cycle

Started by jazzly

Replies: 3
Views: 4406
Last post November 09, 2008, 09:51:21 AM
by Repair-man
Frigidaire Top Load Washer Timer Stops At Same Spot Every Time

Started by grace1717

Replies: 31
Views: 10718
Last post May 04, 2013, 02:45:01 PM
by abzaatari
Roper Washer Stops during the Wash Cycle.

Started by TechnicianBrian

Replies: 1
Views: 3814
Last post May 28, 2013, 03:37:08 AM
by Rick32k