Author Topic: dco  (Read 1872 times)

Offline 66carlos66

  • Technician
  • Member Since: Jun 2008
  • Posts: 10
  • Country: ca
dco
« on: June 27, 2008, 04:54:50 PM »
somebody can tell me what   '' dco '' means, i found it on a range schematic.
and where I can find a book of how to read schematic. :-\ :embarassed:

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9478
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: dco
« Reply #1 on: June 27, 2008, 05:10:00 PM »
Hi,

Can't think of what dco is off hand at this time, but you may find this book helpful.

Troubleshooting and Repairing Major Appliances, 2nd Ed

I have not read it myself, but I have paged through it at the local library after my wife pointed it out to me, :)

I see in the description it say's..

Quote
instructions for reading wiring diagrams

What was the dco next to on the range schematic you were looking at?
Hope you find our site helpful.

Offline 66carlos66

  • Technician
  • Member Since: Jun 2008
  • Posts: 10
  • Country: ca
Re: dco
« Reply #2 on: June 27, 2008, 06:52:48 PM »
i apreciate the help ,       it is beside the second interlock switch. ( where is the first one ?   ) and those contact are inside the oven control ,  look at the attach.

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: dco
« Reply #3 on: June 27, 2008, 09:25:44 PM »
DCO = Digitally Controlled Oscillator (Clock/Timer)

first Interlock Switch is over to the left a little and down, above the Clean Pilot light.

They're both part of the solenoid operated Door Lock switch (Lock, Unlock)

Might this be an Inglis IHP33802 ?
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline 66carlos66

  • Technician
  • Member Since: Jun 2008
  • Posts: 10
  • Country: ca
Re: DCO
« Reply #4 on: June 27, 2008, 10:41:19 PM »
thank  AJ  & carma u r good O0,. i  just look at tha stove and make sense wire color, swithes & the schematic.
it's a whirpool wlp83800


thank u..            carlos. ;)