Author Topic: Whirlpool Duet Front load Washer GHW9150PW0 MODEL. F11 CODE  (Read 2309 times)

Offline Denis Yee

  • VIP Member
  • Member Since: Mar 2014
  • Posts: 2
I have tried to resolve the F11 code. I start the diagnostic program. The C:00 fine - Door locks. C:01 starts. Water enters  tub, then fault code F11 appears. Communication between the Central Control Unit (CCU) and the Motor Control Unit (MCU) cannot be sent correctly. I have verified the wire contact and added solder to the contact on the (CCU). I have verified the wire clip leading to the (MCU). All have continuity on board and wire harness. I verified the cold water inlet valve, checked the flowmeter (resistance), dispenser motor and contacts. All OK. I have attempted to bypass the dispenser motor, no avail. Washer will not begin. Back to default f11.  I attempt to skip test program levels. I have reached C:03, C:04, C:05 and C:06. All different levels begin for aobout 10-15 seconds, then the default code F11 returns. Is the CCU at fault or is it the MCU.

Any help would be greatly appreciated. 
GHW9150PW0

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9330
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Whirlpool Duet Front load Washer GHW9150PW0 MODEL. F11 CODE
« Reply #1 on: March 09, 2014, 11:05:04 PM »
Hi,

It could be either one. I would start by replacing the MCU, part # 8182706.

Why you ask, only because it's cheaper then the CCU, part # 8182695.

Wish I had a better answer for you, but it really is a guessing game when it comes down to the F11 MCU vs. CCU problem on these machines.

Wish I had a better answer for you. If it makes you feel any better the above answer is also the answer I receive from the Whirlpool factor techs when I question them about the F11 problem.

The good news is if you order the parts from the links I posted above you can return the one that don't solve your problem as AppliancePartsPros.com has a great no hassle return policy.
Hope you find our site helpful.
Follow us on Google+

Offline Denis Yee

  • VIP Member
  • Member Since: Mar 2014
  • Posts: 2
Re: Whirlpool Duet Front load Washer GHW9150PW0 MODEL. F11 CODE
« Reply #2 on: March 12, 2014, 09:52:21 PM »
Hi  Mr. A.J. Technical Administrator.

I would like to thank you for your response regarding my post. I have the Whirlpool Duet GHW9150PW0.  My issue was with the F11 code. I have replaced the Motor Control Unit (MCU). The washer is now capable of running the diagnostic test completely without any "F" codes reappearing. Crossing my finger for the future.

Again,


Thank you.....Great help.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9330
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Whirlpool Duet Front load Washer GHW9150PW0 MODEL. F11 CODE
« Reply #3 on: March 12, 2014, 10:39:32 PM »
That's great, thanks for the update!
Hope you find our site helpful.
Follow us on Google+

Offline Tony45

  • Technician
  • Member Since: Nov 2013
  • Posts: 35
  • Country: ca
Re: Whirlpool Duet Front load Washer GHW9150PW0 MODEL. F11 CODE
« Reply #4 on: July 05, 2014, 11:03:28 AM »
another guessing game... expensive when you are at your own acount

it it true to say if the f11 occur at the beginning of the cycle  the fault part would be the mcu and if it happen at the end of cycle  it would be the CCU...   ???

donate
$1, $2, $5, $10, $20, $50
 

Whirlpool Duet front load washer error code FH

Started by jimhokie

Replies: 9
Views: 2363
Last post October 28, 2013, 06:08:52 PM
by jimhokie
Video: Whirlpool Duet Front Load Washer Water Pump Clean Out.

Started by AJ

Replies: 0
Views: 6105
Last post November 28, 2007, 09:58:47 PM
by AJ
Whirlpool Duet Sport Front Load Washer Leaking from the Door

Started by TechnicianBrian

Replies: 1
Views: 14006
Last post May 23, 2013, 08:24:30 PM
by Rick32k
8181684 Whirlpool Duet Front Load Washer Water Drain Pump

Started by AJ

Replies: 0
Views: 10789
Last post March 12, 2009, 12:20:48 AM
by AJ
8182634 Whirlpool Duet Front Load Washer Door Latch/Lock

Started by AJ

Replies: 0
Views: 4987
Last post April 02, 2009, 09:35:17 AM
by AJ
8181924 Whirlpool Duet Front Load Washer Control Board

Started by AJ

Replies: 0
Views: 3246
Last post April 21, 2009, 12:43:29 PM
by AJ