365-Day Hassle Free Return Policy!  ·  AppliancePartsPros.com
Washer Parts  ·  Dryer Parts  ·  Refrigerator Parts  ·  Dishwasher Parts  ·  Range & Oven Parts  ·  All Appliance Parts 

Author Topic: ERC  (Read 110 times)

Offline PARTech

  • Technician
  • Member Since: May 2009
  • Posts: 415
  • Country: us
    • Buy me a beer through paypal
    • Panhandle Appliance LLC
ERC
« on: February 10, 2014, 01:33:51 PM »
Who used to make an ERC, really simple, just a clock and oven control, I'm seeming to remember an Amana withone but can't get close to a model number. Friend is doing a conversion from standing pilot.
Serving North Idaho

Offline Larry the applia

  • Technician
  • Member Since: Jun 2010
  • Posts: 156
Re: ERC
« Reply #1 on: February 10, 2014, 08:01:23 PM »
WB27K10264 erc and WB27K10264 overlay

Offline krazytech

  • Technician
  • Member Since: Sep 2007
  • Posts: 705
  • Country: us
    • Buy me a beer through paypal
Re: ERC
« Reply #2 on: February 10, 2014, 08:13:39 PM »
WB27K10362 ERC $69
Check the Basics first!!! Read the Manual !!!Buy the tech a Beer!!!

Offline Larry the applia

  • Technician
  • Member Since: Jun 2010
  • Posts: 156
Re: ERC
« Reply #3 on: February 10, 2014, 08:25:39 PM »
I believe wb27k10362 is for electric oven

Offline PARTech

  • Technician
  • Member Since: May 2009
  • Posts: 415
  • Country: us
    • Buy me a beer through paypal
    • Panhandle Appliance LLC
Re: ERC
« Reply #4 on: February 11, 2014, 11:07:38 AM »
WB27K10264 erc and WB27K10264 overlay
Looks like something I could do, same part twice. ended up ordering 316455410 and white overlays. Thanks for the notes, I'll keep them for the future, the guy is converting old Wolf standing pilot ranges, gave me a list of part names (no preference as to brand) and just said order them, overnight if possible. Can't seem to find igniter switches to fit the large shaft the knobs mount on...
« Last Edit: February 11, 2014, 11:08:14 AM by PARTech »
Serving North Idaho

Offline nolazach

  • Technician
  • Member Since: Sep 2011
  • Posts: 406
Re: ERC
« Reply #5 on: February 11, 2014, 04:58:53 PM »
Who used to make an ERC, really simple, just a clock and oven control, I'm seeming to remember an Amana withone but can't get close to a model number. Friend is doing a conversion from standing pilot.

I'm interested in this.  I have an old antique Norge that I would like to make more modern..

Offline nolazach

  • Technician
  • Member Since: Sep 2011
  • Posts: 406
Re: ERC
« Reply #6 on: February 11, 2014, 05:00:55 PM »
I have a rental property and the oven didn't fit with the back board, so I took the ERC out, and made a bezel in the wall next to the oven, then extended the wires to it.  I then installed plugs at each end.  It came out pretty good, and the tenants like it. 

Offline PARTech

  • Technician
  • Member Since: May 2009
  • Posts: 415
  • Country: us
    • Buy me a beer through paypal
    • Panhandle Appliance LLC
Re: ERC
« Reply #7 on: February 11, 2014, 06:48:44 PM »
I have a rental property and the oven didn't fit with the back board, so I took the ERC out, and made a bezel in the wall next to the oven, then extended the wires to it.  I then installed plugs at each end.  It came out pretty good, and the tenants like it. 

That is pretty much the way he is going to do this one, mounting the ERC's for the ovens on the walls in a frame someone else is making for the church.When it is done I'll snap some pics and post them.
Serving North Idaho