Author Topic: Gibson furnace won't turn on unless power is cycled first  (Read 731 times)

Offline rdlsz24

  • VIP Member
  • Member Since: Feb 2014
  • Posts: 1
Gibson furnace won't turn on unless power is cycled first
« on: February 05, 2014, 10:05:56 AM »
This morning we woke up and noticed it was colder than normal in our house. Our digital thermostat showed a flame indicated it thought the heater was running, but nothing was coming out of the vents. I started with the easy stuff first. There is a power switch installed on the furnace so I flipped that off and back on and the furnace started right up and worked like normal. Once it got the heat up to what the thermostat was set at it shut off. Next cycle it again did not start. I replaced the batteries in the thermostat and turn it (the thermostat) off and back on. The heater started up and ran normal.

This confuses me, because I now have 2 things that temporarily fixed the issue, so 2 things I guess that could be having an issue.

Any thoughts? I am at work now so can't do any hands-on diagnostics until tonight.

Rob

Offline bleonard1989

  • VIP Member
  • Member Since: Mar 2014
  • Posts: 4
Re: Gibson furnace won't turn on unless power is cycled first
« Reply #1 on: March 29, 2014, 08:41:59 PM »
What is the model number?  The furnace was probably locked out and turning off the power reset it. 

If it is a newer model and has a code indicator, you could try looking at the flashes and seeing the code that appears.

If it is electronic ignition or glow plug, then you could have a bad flame sensor.  You could try to clean it with a dollar bill and see if that helps the problem.  Does it take multiple attempts to light?

It all just depends on how your furnace is set up.  Could be a couple things.

 

Airtemp furnace

Started by maypo52

Replies: 9
Views: 8518
Last post March 05, 2008, 02:36:32 PM
by JWWebster
I bought a Gibson A/c for my father about 6000 BTU.?

Started by yahoo

Replies: 2
Views: 1977
Last post June 07, 2008, 07:44:38 PM
by RegUS_PatOff
whirpool furnace fs643-125cr

Started by ddh

Replies: 2
Views: 2865
Last post July 04, 2008, 09:44:24 AM
by ddh
Rheem Furnace needs a new Thermo Coupler

Started by rezman6

Replies: 3
Views: 6337
Last post October 31, 2008, 08:07:56 AM
by Icehouse
Furnace fan keeps running after normal shutoff by thermostat.

Started by hleebeard@sbcglo

Replies: 1
Views: 6279
Last post January 10, 2009, 09:00:48 PM
by JWWebster
Annual Furnace Tune Up and Maintenance

Started by Icehouse

Replies: 0
Views: 3396
Last post January 24, 2009, 07:28:17 PM
by Icehouse