Author Topic: GE D/W Mod GLD5900N00WW  (Read 714 times)

Offline All Brand

  • Technician
  • Member Since: Sep 2010
  • Posts: 70
  • Country: us
GE D/W Mod GLD5900N00WW
« on: January 29, 2014, 04:01:50 PM »
Wont clean upper rack. Has the right amount of water.How does the water enter the feed to the upper spray arms .Is it thru the Venturi hub or the fine filter ? thxs for the help .Does any one have a service or theory manual on how the water flows,in this unit thxs again Dave
GLD5900N00WW

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1521
  • Country: us
    • Buy me a beer through paypal
GE D/W Mod GLD5900N00WW
« Reply #1 on: January 29, 2014, 09:40:36 PM »
The inlet screen is molded into the sump boot.  This is a really poor design with the chopper blade behind the screen instead of in front of it.  Remove the sump cover and clean it out.  I usually find it plugged with shredded napkins.

Offline All Brand

  • Technician
  • Member Since: Sep 2010
  • Posts: 70
  • Country: us
GE D/W Mod GLD5900N00WW
« Reply #2 on: January 30, 2014, 01:48:45 PM »
Thanks I will check that.