Author Topic: Furnace blower turns off and on 3 times at the end of the heating cycle  (Read 2779 times)

Offline Michael Joyce

  • VIP Member
  • Member Since: Jan 2014
  • Posts: 4
Model: Carrier 58gp075-3
Heat cycle runs properly then at the end of the cycle, the blower turns off for 2 seconds, then back on for 2 seconds.  It does that 3 times total before turning off until the next run.  I have cleaned, then replaced the thermocouple hoping it would be that simple, but apparently something else is malfunctioning.  Please let me know if you have any ideas on what the issue could be.  Thank you.

 :thanks:
« Last Edit: January 28, 2014, 11:07:01 AM by Michael Joyce »

Offline DaleCaskanette

  • Technician
  • Member Since: Dec 2013
  • Posts: 100
  • Country: ca
not familiar with this mod. but most furnaces of this vintage had a fan control it turns on at a set temp and shuts off at a set temp, sounds like your fan is shutting off too soon and residual heat is turning fan back on. turn your cut out lower if it is adjustable

Offline Michael Joyce

  • VIP Member
  • Member Since: Jan 2014
  • Posts: 4
Thanks, Dale.  I'm going to try and get in there over the weekend.  It's due for a good cleaning as well.  I will post the results as soon as I can.

 

How does a Warm Air Heating Furnace work?

Started by Icehouse

Replies: 0
Views: 7677
Last post January 24, 2009, 07:31:22 PM
by Icehouse
Gas furnace runs one cycle, then won't start up again!!

Started by alexchaumont

Replies: 3
Views: 10359
Last post March 25, 2010, 08:05:25 AM
by RegUS_PatOff
Airtemp furnace

Started by maypo52

Replies: 9
Views: 10943
Last post March 05, 2008, 02:36:32 PM
by JWWebster
AC Blower Wiring Questions

Started by billnc

Replies: 6
Views: 17592
Last post June 18, 2008, 11:43:13 PM
by JWWebster
whirpool furnace fs643-125cr

Started by ddh

Replies: 2
Views: 4354
Last post July 04, 2008, 09:44:24 AM
by ddh
blower motor conversion

Started by hvacapprenticein

Replies: 5
Views: 6492
Last post July 20, 2008, 02:46:48 PM
by JWWebster