Author Topic: Maytag CRG9700CAM TIMER  (Read 455 times)

Offline toddrs93

  • VIP Member
  • Member Since: Jan 2014
  • Posts: 1
Maytag CRG9700CAM TIMER
« on: January 19, 2014, 09:19:12 AM »
My timer has been slowly going dim on the display and  it finally got to the point where it wouldn't work at all to turn the oven on or anything.  I pulled it apart and found one of the caps to be blown.  I had an electronics repair shop replace the caps and clean up some light damage.  The timer then worked for a day and went blank again.  This time we pulled it back off and replaced a zener diode which appeared to have possible damage as well.  It did not fix the problem. 

The shop is confident they can fix it if we could find a schematic for the timer.  Does anyone know where I can find one? 

Also I have looked everywhere for a replacement timer and I can not come up with anything. appliancetimers.com does not have them and will not service them anymore.

CRG9700CAM

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1494
  • Country: us
    • Buy me a beer through paypal
Re: Maytag CRG9700CAM TIMER
« Reply #1 on: January 19, 2014, 10:03:22 AM »
If there are any control board schematics out there, they are a very well kept secret.  I don't see your part number, 74001283, on fixyourboard.com or Corecentricsolutions.com repair lists. There's one on ebay right now for about $65 shipped. 

 

maytag propane stove

Started by mthd60sprty

Replies: 6
Views: 5307
Last post November 10, 2007, 01:25:38 PM
by maypo52
Maytag Gemini Temp Sensor Problem

Started by csala

Replies: 3
Views: 5417
Last post December 17, 2007, 10:25:04 PM
by AJ
Maytag Double Wall oven lights

Started by jumptrout51

Replies: 2
Views: 4298
Last post December 23, 2007, 01:26:06 PM
by kjagmin
Maytag Range - Does not heat

Started by AJ

Replies: 4
Views: 8755
Last post February 23, 2008, 04:58:52 PM
by AJ
Maytag self clean wall oven

Started by MajorApp

Replies: 13
Views: 5536
Last post May 19, 2008, 09:58:15 AM
by MajorApp
Maytag Range no Oven Operation

Started by TechnicianBrian

Replies: 0
Views: 3058
Last post March 29, 2008, 05:33:22 PM
by TechnicianBrian