Washer PartsDryer PartsRefrigerator PartsDishwasher PartsRange & Oven PartsAll Appliance Parts

Author Topic: Maytag washer won't cycle  (Read 2585 times)

Offline kenlou

  • VIP Member
  • Member Since: Jun 2008
  • Posts: 2
Maytag washer won't cycle
« on: June 21, 2008, 05:05:12 AM »
Several weeks ago, the washer would stop after filling. I would jiggle the control knob and it would continue and complete. Now after filling with water, agitation will not start, but the timer continues to advance as it should but agitation, drain or rinse cycles do nothing....tub still full of water.

With tub still full, I try to use another cycle, and the only one that will work at all is the delicate cycle....any ideas, a timer?

Model LAT4914AAL

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Maytag washer won't cycle
« Reply #1 on: June 21, 2008, 06:57:52 AM »
Yes, replace the timer and everything should be back to normal. It is typical of this to fail in stages, such as the intermittent operation of one or 2 cycles. Eventually the contact in question fails completely and none of the programs will work.
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline kenlou

  • VIP Member
  • Member Since: Jun 2008
  • Posts: 2
Re: Maytag washer won't cycle
« Reply #2 on: June 21, 2008, 07:02:42 AM »
OK, thank you very much...didn't want to spend that money fer nothing


Maytag washer mah4000aww spin cycle

Started by evo100

Replies: 1
Views: 5355
Last post December 25, 2007, 09:41:02 PM
by AJ
Maytag washer-- got agitation, no spin in spin cycle

Started by PB3

Replies: 13
Views: 19323
Last post March 28, 2008, 09:18:30 AM
by PB3
Maytag top load Washer is still full of water at end of cycle

Started by 123123123

Replies: 7
Views: 6594
Last post April 22, 2009, 01:28:56 PM
by JWWebster
Maytag LA8650 Washer - Grinding/Scraping/Rattle Noise During Spin Cycle

Started by Carol2

Replies: 17
Views: 14228
Last post April 02, 2009, 05:40:54 PM
by Carol2
maytag washer rubbing sound during spin cycle

Started by rasputins fingerbone

Replies: 4
Views: 5245
Last post March 26, 2009, 10:38:41 PM
by theoldstoveguy
Maytag washer sounds like a plane taking off during spin cycle.

Started by justinc25

Replies: 6
Views: 7477
Last post April 05, 2009, 09:44:04 AM
by justinc25