Author Topic: Kenmore 110.47781701 F-35 code  (Read 249 times)

Offline Caddy4343

  • VIP Member
  • Member Since: Oct 2007
  • Posts: 46
Kenmore 110.47781701 F-35 code
« on: December 20, 2013, 04:19:31 PM »
Tech sheet indicates a bad pressure switch.  Blew through hose - no obstruction.  What has me concerned is that the motor will not run in agitate or spin but the water shuts off at the proper level.  In test cycle I only get a C:00 and it won't go to C:01 etc on the display but it appears to go through the tests.  There is no movement in the motor including when set in a Drain/Spin cycle.  The pump works fine but gets "stuck" until I unplug the machine.  When plugged back in the pump is off.
 
Anyone have any ideas?
 
Thanks,
 
Don.   

Offline LowSL2

  • Technician
  • Member Since: Dec 2011
  • Posts: 615
  • Country: us
    • Buy me a beer through paypal
Re: Kenmore 110.47781701 F-35 code
« Reply #1 on: December 21, 2013, 11:17:58 AM »
This is a common problem with these steam washers. Replace the pressure sensor W10415587

Sent from my DROID BIONIC using Tapatalk
LowSL2
Over 10 years experience working on kitchen and laundry appliances for the people in the blue vans...

Offline Caddy4343

  • VIP Member
  • Member Since: Oct 2007
  • Posts: 46
Re: Kenmore 110.47781701 F-35 code
« Reply #2 on: December 21, 2013, 01:20:24 PM »
Thank you.
 
I was just concerned by the motor not working.  Darned electronics.... one thing effects another.

 

Kenmore Elite Oasis F-50 Code

Started by Heimbig

Replies: 1
Views: 4455
Last post October 24, 2008, 01:56:14 PM
by Repair-man
Kenmore Elite Oasis HE Washer - oL code

Started by showlowjimbo

Replies: 4
Views: 8982
Last post April 07, 2009, 05:11:15 PM
by Repair-man
kenmore elite washer code f1

Started by repairguy42

Replies: 1
Views: 1950
Last post March 22, 2010, 10:05:16 PM
by JWWebster
Kenmore Elite Oasis HE Washer - oL code

Started by NH

Replies: 0
Views: 3637
Last post April 26, 2010, 01:14:52 AM
by NH
Kenmore Oasis UL code (even with no clothes.)

Started by Johns Repair

Replies: 9
Views: 10711
Last post December 14, 2011, 07:50:22 AM
by bigbuck
Kenmore/Whirlpool Calypso "FL" error code

Started by mdevera211

Replies: 1
Views: 3110
Last post August 07, 2010, 02:40:51 PM
by JWWebster