Author Topic: Bosch DW blank display  (Read 1866 times)

Offline zinsco

  • VIP Member
  • Member Since: Jun 2008
  • Posts: 2
Bosch DW blank display
« on: June 18, 2008, 02:37:01 PM »
The kitchen sink clogged and backed up into the dishwasher causing the over flow switch to move up so that the pump runs constantly. I sucked out the water from underneath allowing the switch to go down and the pump has stopped running.

The problem now is that the display on top is out. The one on the front flashes and says, "Not Started." When pressing any buttons there is a beep and that is all. No menu to look at or scroll and I can not run the dishwasher at all.

Any help is appreciated

SHY99A05UC
« Last Edit: June 18, 2008, 06:05:40 PM by zinsco »

Offline Penguin45

  • VIP Member
  • Member Since: Apr 2008
  • Posts: 81
    • www.ukwhitegoods.com
Re: Bosch DW blank display
« Reply #1 on: June 18, 2008, 07:56:32 PM »
Looks like a NA product only. Based on our ones in Europe, you are probably looking at a PCB failure - it may be worth checking the status of the door switch; some Bosch machines won't programme if the door isn't shut (or thinks it isn't shut......

Penguin45.

Offline zinsco

  • VIP Member
  • Member Since: Jun 2008
  • Posts: 2
Re: Bosch DW blank display
« Reply #2 on: June 19, 2008, 09:42:54 PM »
What exactly is the PCB?

I don't quit see where your coming from with the door switch.  The display that's blank is on the top of the door so that you do not see it when the door is closed nor are you able to press any buttons to start a wash when the door is closed.  The display that is on the front can be seen when the door is closed and it is flashing, "Not Started."

Offline Penguin45

  • VIP Member
  • Member Since: Apr 2008
  • Posts: 81
    • www.ukwhitegoods.com
Re: Bosch DW blank display
« Reply #3 on: June 21, 2008, 02:54:47 PM »
PCB = printed circuit board - it's the computer which runs the machine.

The loop sticking out of the top of the casing engages in a "turn over" latch mechanism in the top of the door, which works a switch. If it doesn't, the machine will not start. Check that first. If it's functional, the problem may well lie witt the computer.

Penguin45.

 

Bosch Dishwasher

Started by jumptrout51

Replies: 11
Views: 5727
Last post February 10, 2011, 05:43:44 AM
by AJ
SHU5316 UC Deco panel for Bosch DW

Started by Repair-man

Replies: 8
Views: 2592
Last post June 18, 2008, 05:57:20 PM
by Penguin45
Bosch Not Working Correctly

Started by scarr25

Replies: 1
Views: 1715
Last post June 18, 2008, 07:51:15 PM
by Penguin45
Bosch Dishwasher SMU2046 wont fill

Started by noneal

Replies: 5
Views: 6618
Last post August 26, 2008, 08:44:35 PM
by noneal
shx46b05uc bosch dw how to reset after backup

Started by momnesmith

Replies: 4
Views: 2723
Last post August 27, 2008, 09:22:20 PM
by momnesmith
Bosch Dishwasher Fills then Drains Repeatedly

Started by TechnicianBrian

Replies: 3
Views: 8829
Last post October 05, 2008, 01:57:35 PM
by TechnicianBrian