365-Day Hassle Free Return Policy!  ·  AppliancePartsPros.com
Washer PartsDryer PartsRefrigerator PartsDishwasher PartsRange & Oven PartsAll Appliance Parts

Author Topic: Cabrio washer out of balance in spin  (Read 1728 times)

Offline Preferred Appliance

  • Technician
  • Member Since: Mar 2013
  • Posts: 74
  • Country: us
Re: Cabrio washer out of balance in spin
« Reply #10 on: December 17, 2013, 04:29:21 PM »
I had the same thing happen. Went out first time and there were socks between the basket and tub. Ran a load with customer present. Tested ok. Went back out on same washer 2 months later, same thing. OB error with no load in it. checked between basket and tub, it was clean. Found one of the 4 suspension rods were bent. Found new rods seem to have been improved a bit.

 

Maytag by Performa washer, Outta balance during spin cycles

Started by xman

Replies: 9
Views: 6344
Last post January 15, 2009, 09:15:04 AM
by xman
Maytag Washer A183 Out of Balance during Spin

Started by pwcunning

Replies: 1
Views: 2098
Last post April 18, 2009, 05:46:47 PM
by JWWebster
Whirlpool Cabrio washer sounds like a jet taking off in the spin cycle

Started by cindid

Replies: 5
Views: 11201
Last post June 04, 2015, 06:56:39 PM
by Sjmontano
Whirlpool Cabrio washer shuts down at start of spin & lid lock light flashes

Started by tagarman

Replies: 9
Views: 30545
Last post January 24, 2014, 07:30:41 PM
by Try2fixem
Whirlpool Cabrio Washer bearing noise during spin

Started by killowells

Replies: 2
Views: 4853
Last post October 18, 2014, 06:03:08 PM
by huntfam
GE Frontload Washer Out of Balance during Spin - Tub Moves Side to Side

Started by rockinrobin

Replies: 3
Views: 1322
Last post February 02, 2013, 12:48:09 PM
by tgoods