Forum > Dryer Repair

DCVH515EF0WW no power

<< < (2/2)

donald.stark:
The cable to the user interface connection is a pin block, with no exposed surface to clean. The connector on the power board is the pin side of the connection and is not cleanable with an eraser. I did reset it several times to use that friction to clean the contacts with no effect.
Power is good.

I replaced the main power board and that fixed the problem.
Thanks to all for your suggestions and help.

dab147315:
Thanks for getting back to us.Its good to know what happens when people post what solve there problem.

Navigation

[0] Message Index

[*] Previous page

Go to full version