Author Topic: Maytag Washer F01 Error Code  (Read 7978 times)

Offline TechnicianBrian

  • Technician
  • Member Since: Dec 2007
  • Posts: 390
  • Country: us
    • TechnicianBrian.com
Maytag Washer F01 Error Code
« on: June 17, 2008, 07:13:27 AM »

Model #MHWZ600TW01, this unit would display an F01 error immediately after the start button was pressed. This error is an EEPROM communication failure of the electronic control board and is an internal failure that basically indicates the washer no longer thinks it's a washer. Since the repair requires the board to be replaced, I installed a new control board and now it has started washing again. A word of caution. Whirlpool has been making a lot of changes to the control boards of their front load washers (yes Maytag too) so make sure you are ordering the correct model using the full model number including the last two digits. If you install the wrong board, you may find yourself trying to fix a self induced problem.


 

Maytag Neptune TL Washer UC Error Code

Started by TechnicianBrian

Replies: 0
Views: 22207
Last post October 14, 2008, 06:38:41 AM
by TechnicianBrian
HR error code Maytag Washer

Started by gkofc

Replies: 0
Views: 2315
Last post January 14, 2010, 09:25:13 AM
by gkofc
Whirlpool Duet Washer - F-30 error code and clunking noise in detergent area.

Started by AJ

Replies: 3
Views: 14114
Last post November 15, 2009, 09:34:58 AM
by AJ
Kitchenaid Washer F11 Error Code

Started by TechnicianBrian

Replies: 0
Views: 5467
Last post March 23, 2008, 07:06:27 AM
by TechnicianBrian
LG Front Load Washer LE Error code

Started by TechnicianBrian

Replies: 43
Views: 103016
Last post March 12, 2012, 08:01:50 AM
by roodog
Whirlpool Duet Washer F5 Error Code

Started by TechnicianBrian

Replies: 2
Views: 9858
Last post October 05, 2008, 08:39:47 PM
by TechnicianBrian