Author Topic: Kenmore 90 Series washer: Cold water does not fill wash, but fills rinse  (Read 1420 times)

Offline purnell1

  • VIP Member
  • Member Since: Nov 2013
  • Posts: 3
I have a Kenmore 90 Series washer. The cold water does not fill at the "wash" cycle, but it fills during the "rinse" cycle. I also noticed that when I use the "Automatic Temperature Control" settings of Cold/Cold it works during the "wash" cycle". There is no issue with the hot water. I've also checked the water pressure and the valve screens. I am thinking that I need to replace the water inlet valve, but I wanted to make sure that this is the issue/only issue. If there is another issue that I need to address I'd like to know so that I can replace all at the same time.


Online dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 1969
  • Country: us
Post your complete model number.

Offline purnell1

  • VIP Member
  • Member Since: Nov 2013
  • Posts: 3
The Model number is 110.26912691 according to the sticker just inside the top.

Online fairbank56

  • Technician
  • Member Since: Aug 2012
  • Posts: 470
  • Country: us

Offline purnell1

  • VIP Member
  • Member Since: Nov 2013
  • Posts: 3
Sorry for taking so long to reply. I replaced the temp switch and it is running as it should now. I want to thank you for pointing me in the right direction. Thanks again!


kenmore washer 90 series won't fill water

Started by ryanbach

Replies: 9
Views: 8006
Last post August 20, 2009, 07:59:30 PM
by Washaman
kenmore clothes washer won't fill with cold water or spin

Started by freedive57

Replies: 11
Views: 7455
Last post October 22, 2009, 12:05:32 AM
by freedive57
Kenmore 70 Series Washer - no cold water, weak spin cycle?

Started by Q451990

Replies: 10
Views: 5695
Last post January 28, 2010, 08:31:18 PM
by viking351
My kenmore washer fills with water but will not spin, rinse or drain

Started by Watson88

Replies: 7
Views: 6611
Last post August 08, 2011, 06:02:55 PM
by JWWebster
Complicated Kenmore washer with ATC,warm water comes in when cold wash selected

Started by shillion

Replies: 8
Views: 4225
Last post February 19, 2012, 10:16:19 PM
by wildimaginations
Kenmore Washer 400 series MDL: 28432700 Fills with water then nothing

Started by abranch

Replies: 8
Views: 1519
Last post December 04, 2013, 03:32:27 PM
by dab147315