Author Topic: lubrication for Turbo aire fan issues  (Read 328 times)

Offline ron3033

  • VIP Member
  • Member Since: Feb 2013
  • Posts: 20
  • Country: ca
lubrication for Turbo aire fan issues
« on: November 18, 2013, 05:53:04 PM »
I have a Turbo aire  high velocity fan.  It was have trouble getting going.  So I took the motor out and got oil down the litttle hole on the back of the bushing /bearing.  But the shaft end had no hole so i took an insulin syringe and got a bit of oil down around the rubber washer .  All good for one or two days and it got slowed up to start.  So i repeated the same with oil and release oil mixture.  All good agian for a few days.  It seems that the oil is not lubing the shaft or is going stick.  the fan turns real slow and evetually goed gull speed.  After I oiled it I could manually spin it like nothing.

Suggestions welcome

Thanks
ron3033

donate
$1, $2, $5, $10, $20, $50
 

Washer Dryer issues

Started by brokedoke

Replies: 1
Views: 661
Last post December 15, 2011, 11:52:54 PM
by AJ