Author Topic: MAYTAG NEPTUNE FRONT LOAD MAH6700AWW NOT WORKING FRUSTRATED  (Read 6960 times)

Offline stacy2

  • VIP Member
  • Member Since: Jun 2008
  • Posts: 3
I have a maytag, its only 2 years old and the thing stopped and the door locked and I couldnt get it open.  I tried turning it off, unplugging it and pushing all the buttons.  So I took it apart not knowing what I was doing of course.  Well it seems that there was still water in it.  I drained all the water, took apart what I assume from pictures is the drain motor and put it all back together.  The door unlocked and so I started the load again and it was doing fine till it needed to drain again.  It stopped again with water in it.  I am so mad that my warrenty for parts ran out about a week ago.  Anyway should I get a drain motor? ??? Help

Thank you, Stacy

Model MAH6700AWW

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: MAYTAG NEPTUNE FRONT LOAD MAH6700AWW NOT WORKING FRUSTRATED
« Reply #1 on: June 15, 2008, 04:04:21 PM »
You simply need to replace the pump. This machine was not made by Maytag, but is a Samsung product. You already know how to do this, right?
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline stacy2

  • VIP Member
  • Member Since: Jun 2008
  • Posts: 3
Re: MAYTAG NEPTUNE FRONT LOAD MAH6700AWW NOT WORKING FRUSTRATED
« Reply #2 on: June 15, 2008, 08:13:53 PM »
I am sure I can replace it.  I just wanted to make sure that was the problem before I ordered the part.   I saw it in the parts and it looks the same but is there any differences?  Could you by chance refer me to the correct part?  Its model number is Mah6700Aww.  Why does the instruction booklet tell me its a Maytag?

Offline apptech

  • Technician
  • Member Since: Sep 2007
  • Posts: 160
Re: MAYTAG NEPTUNE FRONT LOAD MAH6700AWW NOT WORKING FRUSTRATED
« Reply #3 on: June 15, 2008, 08:18:59 PM »
Here is the correct water pump for your washer.  O0

WHIRLPOOL 34001320 Complete Drain Pump Assembly, AP4044238



Offline stacy2

  • VIP Member
  • Member Since: Jun 2008
  • Posts: 3
Re: MAYTAG NEPTUNE FRONT LOAD MAH6700AWW NOT WORKING FRUSTRATED
« Reply #4 on: June 15, 2008, 09:18:30 PM »
Thats exactly what it looks like.  I will order that and let you know if it worked.
Thank you for your help!
Stacy

 

help with maytag neptune front load washer start but stop after few seconds..

Started by soccerboy

Replies: 4
Views: 5485
Last post August 06, 2008, 06:40:10 AM
by Repair-man
Maytag Neptune Front Load Door Leak

Started by MajorApp

Replies: 0
Views: 2517
Last post June 01, 2009, 09:47:23 PM
by MajorApp
Maytag Front Load Neptune Washer Banging Noise when Spinning

Started by dkmminc

Replies: 11
Views: 11666
Last post June 17, 2010, 11:05:11 PM
by schaffersapplian
Maytag Neptune Front-load Washer Smoking (MAH8700AWW)

Started by jrossano

Replies: 7
Views: 3510
Last post October 16, 2012, 06:32:33 AM
by tgoods
Maytag MAH8700AWW Neptune Front Load Washer with dreaded ND

Started by dlachermeier

Replies: 2
Views: 3707
Last post November 08, 2012, 10:34:25 AM
by dlachermeier
Maytag Neptune front load boot shred problem

Started by Thorning

Replies: 11
Views: 1923
Last post June 16, 2013, 08:05:44 PM
by Thorning