MAYTAG NEPTUNE FRONT LOAD MAH6700AWW NOT WORKING FRUSTRATED

[stacy2]

I have a maytag, its only 2 years old and the thing stopped and the door locked and I couldnt get it open.  I tried turning it off, unplugging it and pushing all the buttons.  So I took it apart not knowing what I was doing of course.  Well it seems that there was still water in it.  I drained all the water, took apart what I assume from pictures is the drain motor and put it all back together.  The door unlocked and so I started the load again and it was doing fine till it needed to drain again.  It stopped again with water in it.  I am so mad that my warrenty for parts ran out about a week ago.  Anyway should I get a drain motor? Help

Thank you, Stacy

Model MAH6700AWW

[Repair-man]

You simply need to replace the pump. This machine was not made by Maytag, but is a Samsung product. You already know how to do this, right?

[stacy2]

I am sure I can replace it.  I just wanted to make sure that was the problem before I ordered the part.   I saw it in the parts and it looks the same but is there any differences?  Could you by chance refer me to the correct part?  Its model number is Mah6700Aww.  Why does the instruction booklet tell me its a Maytag?

[apptech]

Here is the correct water pump for your washer. 

WHIRLPOOL 34001320 Complete Drain Pump Assembly, AP4044238

[stacy2]

Thats exactly what it looks like.  I will order that and let you know if it worked.
Thank you for your help!
Stacy