Author Topic: Maytag PGR5710BDQ Gas Range, Flashing lock light when bake or broil is pressed  (Read 5739 times)

Offline straycatt

  • VIP Member
  • Member Since: Jun 2008
  • Posts: 3
When Bake or Broil is pressed, a flashing lock light is indicated.  Will not start bake cycle.
No F codes displayed.


If you try the self clean cycle, an F9 code appears after about 30-50secs....

Am I correct in guessing it is the ECR??

-Adam

Model PGR5710BDQ

« Last Edit: June 14, 2008, 11:01:00 AM by straycatt »

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
More than likely a failure of the door latch assembly. One of the interlock switches is not satisfied, causing the flashing response from the ERC. The F-9 further solidifies the latch as the source of the problem. Frequent self-cleaning is contributed as a cause of this failure.

You're looking for a 12001942 latch assembly...apparently hard to find these days. H-m-m-m
« Last Edit: June 14, 2008, 11:16:06 AM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline straycatt

  • VIP Member
  • Member Since: Jun 2008
  • Posts: 3
Is there any easy way to confirm the lock??? Is it adjustable, or will it just need to be replaced??

-Adam

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Sir, I am confirming it for you, as a former senior field service associate for Maytag Corporation. No, there's no adjustment. 3 screws and you're done.
« Last Edit: June 14, 2008, 11:18:34 AM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline straycatt

  • VIP Member
  • Member Since: Jun 2008
  • Posts: 3
Thank you...  Will order it now.  Already yanked out the old one.

-Adam

 

Maytag PGR5710BDQ Gas Range, Flashing lock light when bake or broil is pressed

Started by oventroubles

Replies: 1
Views: 2572
Last post September 16, 2010, 07:07:03 PM
by AJ
74008064 Maytag Jenn Air Bake Broil Oven Range Ignitor

Started by AJ

Replies: 0
Views: 4930
Last post April 09, 2009, 08:49:06 PM
by AJ
Maytag CGR3730ADH (30" range) lock light blinking after power outage

Started by spup345

Replies: 8
Views: 5651
Last post May 22, 2011, 05:20:08 PM
by AJ
Frigidaire Range no Bake or Broil

Started by TechnicianBrian

Replies: 0
Views: 3145
Last post May 13, 2008, 09:48:19 PM
by TechnicianBrian
Hotpoint Range no Bake or Broil

Started by TechnicianBrian

Replies: 0
Views: 2343
Last post May 18, 2008, 07:42:18 AM
by TechnicianBrian
Kenmore Electric Range-No Bake or Broil

Started by Gobbyparts

Replies: 10
Views: 7086
Last post February 23, 2009, 04:56:02 PM
by RegUS_PatOff