I have a customer with a atlantis electric dryer. Its not heating.
Checked all the thermostats, fuses, and heating element. All good.
There is 120 volts going to the heating element from the motor side (i believe the motor side). The terminal on the left of the heating element has 120 volts when running...
If thats correct, i assume the motor switch is good.
The temp switch seems to be working fine.
There was not any power coming from the timer to the elemnt.
Am assuming the heating element needs 240 volts to heat up.
It looks like the timer is the problem.
Looking for the manual so i can make sure my tests were accurate.
Did not see it on the drive.