Author Topic: Maytag Neptune TL Washing Machin  (Read 2351 times)

Offline lpayne1234

  • VIP Member
  • Member Since: Apr 2008
  • Posts: 8
Maytag Neptune TL Washing Machin
« on: June 18, 2008, 09:19:15 PM »
Went to a customers house today, her washing machine will fill up and over flow, I thought I would do a code Diag. just for the experience. Could only get a code 33, and that code was not in the list of codes. Any help would be appreciated.

Model FAV6800AWQ

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Maytag Neptune TL Washing Machin
« Reply #1 on: June 19, 2008, 09:22:27 AM »
check and see if the little hose has wiggled off from tub bottom to level switch if that contraption has such a thang. Could be it needs to be blowed out . Lint gets in the older machines and stops up the hose.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Maytag Neptune TL Washing Machin
« Reply #2 on: June 19, 2008, 09:27:49 AM »
take a look
« Last Edit: June 19, 2008, 09:30:34 AM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Maytag Neptune TL Washing Machin
« Reply #3 on: June 21, 2008, 08:51:33 AM »
If the airline tubing is intact, you simply need to confirm that the water level switch is or is not closing when the machine fills. Since the unit only draws 4 gallons or so of water, the switch should be satisfied according to the tech sheet you have in your possession. A quick check of the  contacts at the pressure switch will show you where you stand. You can physically hear the diaphragm inside the switch click when the airline charge is satisfied.
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline lpayne1234

  • VIP Member
  • Member Since: Apr 2008
  • Posts: 8
Re: Maytag Neptune TL Washing Machin
« Reply #4 on: June 21, 2008, 11:59:54 AM »
Thanks JW and Repair-man, the switch was bad and I also went ahead and did get some trash out of the airline tube, Thanks to both of you guys. I really like this site where info can be passed on to us new guys on the block.
thanks again

Pressure Switch, part number: AP4035318



 

Maytag Neptune washer MAH4000AWW

Started by Sue

Replies: 8
Views: 8506
Last post February 09, 2013, 07:41:01 AM
by def
Maytag Neptune MAH4000AWW - No Spin.

Started by larry

Replies: 39
Views: 61174
Last post February 21, 2011, 01:22:14 PM
by bwhelan
Maytag Neptune MAH3000AWW Serial 19103060UB

Started by LarryC

Replies: 9
Views: 7959
Last post September 29, 2007, 09:49:12 PM
by AJ
Maytag Neptune MAH4000AWW Won't Drain Water / Smell

Started by mightymac

Replies: 22
Views: 24841
Last post February 15, 2013, 04:35:03 PM
by def
Maytag Neptune will not shut off.

Started by Boatsrule

Replies: 12
Views: 5378
Last post November 02, 2007, 10:15:35 PM
by sparky823
Maytag Neptune MAH4000AWW

Started by BOB V

Replies: 5
Views: 3551
Last post December 22, 2007, 06:36:49 AM
by AJ